Tektronix Phaser 350 manual Selecting the cleaning page source

Using the Front Panel 7

Selecting the cleaning page source

The printer picks sheets of paper from a designated media tray as part of its self-maintenance and jam recovery routines. The default cleaning page source for the printer is the upper tray. When the Lower Paper Tray Assembly is installed, you can change the source of the cleaning page to the lower tray to prevent the printer from using transparencies or letterhead loaded in the upper paper tray.

You can change the cleaning page source through the front panel, by sending a PostScript language file to the printer (refer to the printer’s CD-ROM), or through the World Wide Web (refer to the PhaserShare Status Software User Manual).

To change the cleaning page source from the printer’s front panel, follow these steps:

1.While the Ready message is displayed, press the Menu button. The printer displays the first item in the setup menu:

Help Pages

<---- ----> Menu

2.Using the left arrow (<----)or right arrow (---->)buttons, scroll through the selections until the following message appears:

Printer Defaults

<---- ----> Menu

3.Press the Menu button to access the printer defaults settings.

4.Using the left arrow (<----)or right arrow (---->)buttons, scroll through the selections until the following message appears:

Cleaning Page Source

<---- ----> Menu

User Manual 7-9