VIDEO PLAYBACK EN 15
Playback Using The Remote Control
Buttons And Functions
The
Installing The Battery
The remote control uses one lithium battery (CR2025).
1 Pull out the battery holder by inserting a pointed instrument into the slot.
2 Insert the battery in the holder, and be sure to have the “+” mark visible.
3 Slide the holder back in until you hear a click.
2
3
1
1
Slot
T
W
A Infrared beam transmitting window |
|
|
The following buttons are available only when the |
| |
camcorder’s Power Switch is set to “PLAY”. |
| |
.....................................B AUDIO Button | ( pg. 25, 28) | PLAYBACK |
C PAUSE Button* | ( pg. 16) | |
Up Button | ( pg. 16) | |
D SLOW Rewind Button | ( pg. 16) | |
Beam Effective Area (indoor use)
When using the remote control, be sure to point it at the remote sensor. The transmitted beam’s approximate effective distance for indoor use is 5 m (16 ft).
NOTE:
The transmitted beam may not be effective or may cause incorrect operation when the remote sensor
is directly exposed to sunlight or powerful lighting.
E REW Button* | ( pg. 14, | 20) |
| |
Left Button | ( pg. | 16) | & | |
F INSERT Button | ( pg. | 37) | RECORDING | |
G STOP Button* | ( pg. 14, | 20) | ||
Down Button | ( pg. | 16) | ||
H SHIFT Button | ( pg. | 16) | ||
I EFFECT ON/OFF Button | ( pg. | 16) | ||
J EFFECT Button | ( pg. | 16) | ||
VIDEO | ||||
K SLOW Forward Button | ( pg. | 16) | ||
L FF Button* | ( pg. 14, | 20) | ||
Right Button | ( pg. | 16) |
| |
M PLAY Button* | ( pg. 14, | 20) |
| |
N A. DUB Button | ( pg. | 37) |
| |
O DISPLAY Button | ( pg. 17, | 34) |
|
The following buttons are available when the camcorder’s Power Switch is set to “A” or “M”.
aS.SHOT (Snapshot) Button*
bSTART/STOP Button*
c Zoom (T/W) Buttons** | ( pg. 12, 16) |
*Functions the same as each corresponding button on the camcorder. ( pg. 51)
**Functions when the camcorder’s Power Switch is set to “PLAY” as well.