JVC LYT1265-001B manual EN Editing, To use this camcorder as a recorder, On the connected TV

34 EN EDITING

Dubbing To Or From A VCR		● As the camcorder starts to play your footage, it will appear
		on your TV. This will confirm the connections and the AUX
		channel for dubbing purposes.
		● Before you start dubbing, make sure that the indications do
		not appear on the connected TV. If they do, they are being
		recorded onto the new tape.
		To choose whether or not the following displays appear
		on the connected TV
		• Date/time
		Set “DATE/TIME” to “AUTO”, “ON” or “OFF”.
		( pg. 25, 28) Or, press DISPLAY on the remote control
		to turn on/off the date indication.
		• Time code
		Set “TIME CODE” to “OFF” or “ON”. ( pg. 25, 28)
		• Indications other than date/time and time code
To AV	To S	Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”.
		( pg. 25, 28)

Audio/Video	S-Video cable
cable	(optional)
(provided)

1 2 3 4

TV

VCR

To use this camcorder as a recorder

1)Perform steps 1 to 3 in “To use this camcorder as a player”.

2)Set “S/AV INPUT” to “ON”. (
pg. 25, 28)

3)Set “REC MODE” to “SP” or “LP”. (
pg. 25, 26)

4)Insert the recording cassette in this camcorder.

5)Press the Recording Start/Stop Button to engage the Record-Pause mode. The “ A/V.IN ” indication appears on the screen.

6)Press the Recording Start/Stop Button to start recording. The T indication rotates.

7)Press the Recording Start/Stop Button again to stop recording. The T indication stops rotating.

A White to AUDIO L IN or OUT

B Red to AUDIO R IN or OUT

C Yellow to VIDEO IN or OUT

D To S-VIDEO IN or OUT*

*Connect when your TV/VCR has an S-VIDEO IN/OUT connector. In this case, it is not necessary to connect the yellow video cable.

NOTES:

●After dubbing, set “S/AV INPUT” back to “OFF”.

●Analog signals can be converted to digital signals with this procedure.

●It is also possible to dub from another camcorder.

To use this camcorder as a player

1 Following the illustrations, connect the camcorder and the VCR. Also refer to page 17.

2 Set the camcorder’s VIDEO/MEMORY Switch to “VIDEO”.

3 Set the camcorder’s Power Switch to “PLAY” while pressing down the Lock Button located on the switch.

4

5

6

7

Turn on the VCR’s power.

Insert the source cassette in the camcorder.

Insert the recording cassette in the VCR.

Engage the VCR’s AUX and Record-Pause modes.

●Refer to the instruction manual for the VCR.

8 Press 4/9 on the camcorder to start playback of the source tape.

9 At the point you want to start dubbing, engage the VCR’s Record mode.

10 To pause dubbing, engage the VCR’s Record- Pause mode and press 4/9 on the camcorder.

11 Repeat steps 8 – 10 for additional editing. Stop the VCR and camcorder.

NOTES:

●It is recommended to use the AC Adapter as the power supply instead of the battery pack. (
pg. 7)