JVC 0104-FO-ID-PJ Cassettes, Battery Packs, Memory Cards, Usa, Using Household AC Plug Adapter

CAUTIONS EN 45

When using the AC Adapter in areas other than the		Cassettes
USA
		To properly use and store your cassettes, be sure to read
The provided AC Adapter features automatic voltage
		the following cautions:
selection in the AC range from 110 V to 240 V.
		● During use…
USING HOUSEHOLD AC PLUG ADAPTER
			... make sure the cassette bears the Mini DV mark.
In case of connecting the unit’s power cord to an AC wall			... be aware that recording onto prerecorded tapes
outlet other than American National Standard C73 series			automatically erases the previously recorded video and
type use an AC plug adapter, called a “Siemens Plug”, as			audio signals.
shown.			... make sure the cassette is positioned properly when
For this AC plug adapter, consult your nearest JVC			inserting.
dealer.			... do not load and unload the cassette repeatedly without
	Plug adapter		allowing the tape to run at all. This slackens the tape and
			can result in damage.
			... do not open the front tape cover. This exposes the tape to
			fingerprints and dust.
		● Store cassettes…
			... away from heaters or other heat sources.
Battery Packs			... out of direct sunlight.
			... where they won’t be subject to unnecessary shock or
The supplied battery pack is			vibration.
a lithium-ion battery. Before			... where they won’t be exposed to strong magnetic fields
using the supplied battery			(such as those generated by motors, transformers or
pack or an optional battery			magnets).
			... vertically, in their original cases.
pack, be sure to read the
following cautions:		Memory Cards
● To avoid hazards…	Terminals

... do not burn.

... do not short-circuit the

terminals. When transporting, make sure the provided battery cap is attached to the battery. If the battery cap is misplaced, carry the battery in a plastic bag.

... do not modify or disassemble.

... do not expose the battery to temperatures exceeding 60°C (140°F), as this may cause the battery to overheat, explode or catch fire.

... use only specified chargers.

●To prevent damage and prolong service life…

... do not subject to unnecessary shock.

... charge in an environment where temperatures are within the tolerances shown in the chart below. This is a chemical reaction type battery — cooler temperatures impede chemical reaction, while warmer temperatures can prevent complete charging.

... store in a cool, dry place. Extended exposure to high temperatures will increase natural discharge and shorten service life.

... fully charge and then fully discharge the battery every 6 months when storing the battery pack over a long period time.

... remove from charger or powered unit when not in use, as some machines use current even when switched off.

To properly use and store your memory cards, be sure to read the following cautions:

●During use…

... make sure the memory card bears the SD or MultiMediaCard mark.

... make sure the memory card is positioned properly when inserting.

●While the memory card is being accessed (during

recording, playback, deletion, initialization, etc.)…

... never unload the memory card and never turn off the camcorder.

●Store memory cards…

... away from heaters or other heat sources.

... out of direct sunlight.

... where they won’t be subject to unnecessary shock or vibration.

... where they won’t be exposed to strong magnetic fields (such as those generated by motors, transformers or magnets).

REFERENCES

NOTES:

●It is normal for the battery pack to be warm after charging, or after use.

Temperature Range Specifications Charging: 10°C to 35°C (50°F to 95°F) Operation: 0°C to 40°C (32°F to 104°F) Storage: –20°C to 50°C (–4°F to 122°F)

●The lower the temperature, the longer recharging takes.