EN 35
SYSTEM
DISPLAY
DEMO | OFF | Automatic demonstration will not take place. | |
MODE |
|
| |
ON | Demonstrates certain functions such as Program AE with special effects, etc., | ||
| |||
|
| and can be used to confirm how these functions operate. | |
|
| Demonstration starts in the following cases: | |
|
| • When the Menu Screen is closed after “DEMO MODE” is turned “ON”. | |
|
| • With “DEMO MODE” set to “ON”, if there is no operation for about 3 minutes | |
|
| after the Power Switch is set to “ ” or “ ” . | |
|
| Performing any operation during the demonstration stops the demonstration | |
|
| temporarily. If no operation is performed for more than 3 minutes after that, the | |
|
| demonstration will resume. | |
|
| NOTES: | |
|
| ● If a tape is in the camcorder, the demonstration cannot be turned on. | |
|
| ● “DEMO MODE” remains “ON” even if the camcorder power is turned off. | |
|
| ● If “DEMO MODE” remains “ON”, some functions will not be available. After | |
|
| viewing demo, set to “OFF”. | |
CAM | CANCEL | Does not reset all settings to the | |
RESET |
|
| |
EXECUTE | Resets all settings to the | ||
| |||
ON | LCD | Keeps the camcorder’s display (except the date, time and time code) from | |
SCREEN |
| appearing on the connected TV screen. | |
|
|
| |
| LCD/TV | Makes the camcorder’s display appear on screen when the camcorder is | |
|
| connected to a TV. | |
DATE/ | OFF | The date/time does not appear. | |
TIME |
|
| |
AUTO | Displays the date/time for approx. 5 seconds in the following cases: | ||
| |||
|
| • When the Power Switch is set from “OFF” to “ ” or “ ”. | |
|
| • When tape playback starts. The camcorder displays the date/time when | |
|
| scenes are recorded. | |
|
| • When the date is changed during tape playback. | |
|
|
| |
| ON | The date/time is always displayed. | |
|
|
| |
TIME | OFF | Time code is not displayed. | |
CODE |
|
| |
ON | Time code is displayed on the camcorder and on the connected TV. Frame | ||
| |||
|
| numbers are not displayed during recording. | |
|
|
| |
CLOCK ADJ. | Allows you to set the current date and time ( pg. 11). | ||
|
|
| |
: Factory-preset
NOTES:
●“ 
SYSTEM” and “ 
DISPLAY” functions which are set when the Power Switch is set to “ 
” are also applied when the Power Switch is set to “PLAY” ( pg. 36). “CLOCK ADJ.” only appears when the Power Switch is set to “ 
”.
●Settings made in the “ 
DISPLAY” Menu remain effective even when the Power Switch is set to “ 
”. However, the menu settings can be changed only when the Power Switch is set to “ 
”.