52 EN |
| TROUBLESHOOTING (cont.) | |||
| o |
|
|
|
|
| SYMPTOM | POSSIBLE CAUSES |
| CORRECTIVE ACTION | |
|
| The LCD monitor, the |
|
| • Wipe them gently with soft cloth. |
|
| viewfinder and the lens |
| Wiping strongly can cause damage | |
|
| have become dirty (ex. |
| ( pg. 53). | |
|
|
|
| ||
| pfingerprints). |
|
|
| |
|
|
|
|
| |
| QAn unusual mark appears. |
|
| • Check the section of the manual | |
|
|
|
| that explains LCD monitor/ | |
|
|
|
| viewfinder indications | |
|
|
|
|
| |
|
|
|
|
| ( pg. 60 – 62). |
|
|
|
|
|
|
|
| An error indication | • A malfunction of some kind has |
| • Remove the power supply (battery |
| W(E01, E02 or E06) appears. | occurred. In this case the |
| pack, etc.) and wait a few minutes | |
|
|
| camcorder’s functions become |
| for the indication to clear. When it |
|
|
| unusable. |
| does, you can resume using the |
|
|
|
|
| camcorder. If the indication |
|
|
|
|
| remains even though you repeat |
|
|
|
|
| the above two or three times, |
|
|
|
|
| please consult your nearest JVC |
|
|
|
|
| dealer. Do not eject the cassette. |
|
|
|
|
| This will cause damage to the tape. |
|
|
|
|
|
|
|
| An error indication | • A malfunction of some kind has |
| • Eject the cassette once and re- |
| E(E03 or E04) appears. | occurred. In this case the |
| insert it, then check if the indication | |
|
|
| camcorder’s functions become |
| clears. When it does, you can |
|
|
| unusable. |
| resume using the camcorder. If the |
|
|
|
|
| indication remains even though you |
|
|
|
|
| repeat the above two or three |
|
|
|
|
| times, please consult your nearest |
|
|
|
|
| JVC dealer. |
|
|
|
|
|
|
|
| The charger indicator on | • The temperature of the battery is |
| • To protect the battery, it is |
|
| the camcorder does not | extremely high/low. |
| recommended to charge it in |
| Rlight. | • Charging is difficult in places |
| places with a temperature of 10°C | |
|
|
| subject to extremely high/low |
| to 35°C (50°F to 95°F) ( pg. 54). |
|
|
| temperatures. |
|
|
|
|
|
|
|
|
|
| When the image is printed | • This is not a malfunction. |
| • By recording with “DIS” activated |
|
| from the printer, a black bar |
|
| ( pg. 33) this can be avoided. |
|
| appears at the bottom of |
|
|
|
| Tthe screen. |
|
|
| |
|
|
|
|
|
|
|
| When the camcorder is | • The DV cable was plugged/ |
| • Turn the camcorder’s power off and |
|
| connected via the DV | unplugged with power turned on. |
| on again, then operate it. |
|
| connector, the camcorder |
|
|
|
|
| does not operate. |
|
|
|
|
|
|
|
|
|