JVC LYT0944-001A specifications Playback Sound, Display

EN 37

Playback Sound

During tape playback, the camcorder detects the sound mode in which the recording was made, and plays the sound back. Select the type of sound to accompany your playback picture. According to the menu access explanation on pg. 36, select “SOUND MODE” or “12BIT MODE” from the Menu Screen and set it to the desired parameter.

	STEREO	Sound is output on both “L” and “R” channels in stereo.
SOUND MODE	SOUND L	Sound from the “L” channel is output in stereo.
	SOUND R	Sound from the “R” channel is output in stereo.
	MIX	Original and dubbed sounds are combined and output in stereo on both
		“L” and “R” channels in stereo.
12BIT MODE
	SOUND 1	Original sound is output on both “L” and “R” channels in stereo.
	SOUND 2	Dubbed sound is output on both “L” and “R” channels in stereo.

: Factory-preset

NOTES:

●The “SOUND MODE” setting is available for both 12-bit and 16-bit sound. (In previous models’ functions, “12-bit” is called “32 kHz” and “16-bit” is called “48 kHz”.)

●The camcorder cannot detect the sound mode in which the recording was made during fast-forward or rewind. During playback the sound mode is displayed in the upper left corner.

Display

ON SCREEN setting:

For playback sound, tape speed and tape running.

12B I T / SOUND1	SP 4
L

6

DATE/TIME setting:	TIME CODE setting:
For date/time.	For time code.

DEC 25	’ 02	12 : 34 : 24
5 : 30	PM

Frames*

Seconds

Minutes

*30 frames = 1 second