JVC LYT0944-001A specifications Power Switch Core filter To DV DV cable optional, PC with DV

Make sure the camcorder and PC are turned off.

SYSTEM	CONNECTIONS		EN 45
	Power Switch
		Core filter	Core filter
	To DV	DV cable (optional)	To DV
	IN/OUT		connector
			PC with DV
			connector

Connection To A Personal Computer

This camcorder can transfer still images to a PC with a DV connector by using software equipped with the PC or commercially available software.

1

2 Connect the camcorder to your PC using the appropriate cable as shown in the illustration.

3 Turn the camcorder’s Power Switch to “PLAY” while pressing down the Lock Button located on the switch and turn on the PC.

•Refer to the instruction manual of the software on how to transfer a still image to the PC.

4 When finished, turn off the PC first, then the camcorder.

NOTES:

●It is recommended to use the AC Adapter as the power supply instead of the battery pack (
pg. 9).

●The date/time information cannot be captured into the PC.

●Refer to the instruction manuals of the PC and Software.

●The still images can also be transferred to a PC with a DV connector-equipped capture board.

●When using a DV cable, be sure to use the optional JVC VC-VDV206U or VC-VDV204U DV cable depending on the type of DV connector (4 or 6 pins) on the PC, or use the DV cable provided with the capture board.

●The system may not work properly depending on the PC or capture board you are using.