Sony 1340PW Changing the Camera Properties, Deleting a Camera, Audio tab, Microphone, Mic Volume

Page 27

Audio tab

Perform the settings relating to the microphone connected to the camera.

Microphone

Select ON to transmit the audio signal input from the microphone connected to the camera.

Bit Rate

Select the bit rate to transmit the audio signal input from the microphone connected to the camera.

G.726 (16kbps), G.726 (24kbps), G.726 (32kbps) and

G.726 (40kbps) are available.

Note

When 16 kbps is selected, audio may delay to image in about three seconds maximum during monitoring. Audio and video are almost synchronized when they are played back.

Mic Volume

Set the volume input from the microphone connected to the camera. Maximum volume is obtained with the 10 setting.

Changing the Camera Properties

1 Select the camera whose properties you want to change from the camera tree or the camera list in the Camera Manager window.

The Camera Properties dialog appears.

2 Change the parameters in the Camera Properties dialog.

For details on each parameter, see “Setting the Camera Properties” on page 25.

3 Click the Apply button in the Camera Properties dialog to save the changed settings.

Note

The camera properties cannot be changed while the camera is in recording mode.

Deleting a Camera

To delete the registered camera, proceed as follows:

1 Select the camera you want to delete from the camera tree or the camera list in the Camera Manager window.

2 Click the (Delete Camera(s)) button on the Camera Manager toolbar.

A confirmation dialog appears.

3 Click Yes.

The selected camera is deleted.

Note

The recordings associated with the camera will remain, but cannot be displayed. If you want to delete the recordings, delete them before deleting the camera.

Setups

Setting a Camera

27

Image 27

Contents Network Camera Recorder Copyright Notice Table of Contents System Configuration FeaturesSystem Requirements Installing Network Camera RecorderClick Next License Agreement dialog appears Start the Program To uninstall Network Camera RecorderOperation procedures Let’s Use Network Camera RecorderTo exit the program Register the CameraAssign a Camera to the Monitor Window Control the Camera Record the Camera ImagePlay the Recorded Image Camera name Properties of the recording Status bar Pan & Tilt Presets Toolbar Monitor windowHelp menu Main toolbarTo monitor audio Using the Pop-up Menu in the Monitor WindowMonitoring To change the camera in the monitor windowTo scale the monitoring image to fit the monitor window To turn off the image of the camera from the monitor windowTo return to monitoring the camera image To select the items to be displayed in the monitor windowControlling the Camera To pan & tilt using the Pan & Tilt Presets toolbarTo store new preset positions To edit or delete a preset positionTo change the position of the camera Move Searching for Recordings Recording Using the Recorder ToolbarRecording the Camera Image Manual Playing Back Recorded ImagesTo search by camera To search by date and timeTo limit/expand the searching range Items in the list view To search for a recording using the timelineTo search for a recording from the list view To select the previous or next timelineTo return to monitoring the camera image Displaying a Preview ImagePlaying Back the Located Recording Playback toolbarDeleting Recordings To delete a selected recordingTo delete recordings by specifying the condition Recording Properties Export SettingsExporting to an AVI File Export Recording dialogExport Setting a Camera Camera Manager WindowRegistering a Camera Setting the Camera Properties Network Settings dialogGeneral tab Picture tab Camera tabAudio tab Mic VolumeChanging the Camera Properties Deleting a CameraLayout D 3 cameras Selecting a LayoutLayout types Layout C 2 camerasAssigning a Storage Location Assigning a Camera to the Monitor WindowSelect Select Camera… Schedule Editor toolbar Scheduling RecordingsSchedule Editor Schedule EditorTo create a recurrent event using the week view Creating Recording SchedulesTo set the schedule parameters To delete the schedule To create a date/time event using the list viewTo save the schedule To change the scheduleSymptom Cause and solution TroubleshootingPan & tilt GlossaryAVI Audio Video Interleave FrameChanging the Camera Properties IndexUninstall Network Camera Recorder Sony Corporation