The InstallShield Wizard Complete dialog appears.
Click Finish to complete installation.
If the message requiring restarting appears, restart the computer.
To uninstall Network Camera Recorder
To uninstall Network Camera Recorder, follow the normal uninstall procedure for Windows.
Even if Network Camera Recorder has been uninstalled, the setup and recorded data are not deleted. To delete these data, delete the installation folder and the path specified for the storage location manually.
Let’s Use Network
Camera Recorder
This section introduces the basic operations of Network Camera Recorder step by step for a user using the software for the first time after installation.
For detailed operations, read the “Operations” and “Setups” chapters on pages 12 and after.
Operation procedures
1.Start the program.
To view the image of the camera…
2.Register the camera.
3.Assign a camera to the monitor window.
After the image of the camera is displayed…
4.Control the camera.
5.Record the camera image.
6.Play the recorded image.
Notes
•Before using, connect the camera to the network and turn ON the power.
•For using Network Camera Recorder, you should log in the computer as the Power User or Administrator.
1. Start the Program
Select All Programs from the Windows start menu, then select Network Camera Recorder and Network Camera Recorder in sequence.
You can start the program by
Introduction
Let’s Use Network Camera Recorder
7