DVC20_Eng.book 17 ページ 2005年10月31日 月曜日 午前10時36分
Record mode
Record mode
Check before recording
Check the following by trying recording before important events such as weddings in order to verify that the image recording and audio recording work properly and that you know how to use the
ªHolding the camera-recorder for recording
Normal recording.
≥When walking while recording, keep both eyes open so that you can see where you are going and what is happening around you.
≥Place the
≥Hold the eyecup of the viewfinder as close as possible to your right eye.
≥Take a firm stance with the legs slightly apart.
≥For stable images, it is recommended to use a tripod (optional) whenever possible.
Low-angle recording.
Adjust the angle of the LCD monitor according to the position in which the
≥If the
picture in the LCD monitor cannot be watched properly. ≥For easier
button and the sub zoom lever on the front of the camera- recorder can be used.
For more stable pictures.
≥Stabilize the
ªCheck points
≥Remove the lens cap.
(When the camera is turned on with the lens cap fitted, the automatic white balance adjustment may not function properly. Please turn the camera on after removing the lens cap.)
≥Grip belt adjustment
≥Insert a cassette
≥Adjustment of LCD monitor/viewfinder
≥Setting SP/LP mode
ªAbout auto mode
≥Set the [AUTO/MANUAL/FOCUS] switch to [AUTO], and color balance (white balance) and focusing will be adjusted automatically.
≥Auto white balance:
≥Auto focusing:
AUTO
MANUAL
FOCUS
≥Color balance and focus may not be adjusted depending on light sources or scenes. If so, manually adjust the white balance and focus.
≥Scene mode setting
≥Iris/gain value setting
Recording from a high position.
17