Panasonic DVC20 operating instructions Edit mode, Copying onto a DVD recorder or a VCR Dubbing

DVC20_Eng.book 27 ページ ２００５年１０月３１日 月曜日 午前１０時３６分

Edit mode

Edit mode

Copying onto a DVD recorder or a VCR (Dubbing)

Pictures recorded by the camera-recorder can be stored on a DVD-RAM or other such media. Refer to the instructions for the recorder.

≥Place a recorded cassette in the camera-recorder, and an unrecorded DVD-RAM or cassette in the DVD recorder or VCR.

1Connect the camera-recorder and the recorder. Connecting with the AV cable

[S-VIDEO IN]			[AUDIO IN]
			[VIDEO IN]
2		1
DV S-VIDEO OUT VIDEO OUT	L–	AUDIO	–R
		OUT

≥Connect the camera-recorder and the recorder by using the AV cable 1.

≥If the recorder has an S-Video terminal, then also connect an S-Video cable 2. It allows you to copy clearer image.

Connecting with the optional DV cable (Only for equipment with a DV terminal)

DV

2Turn on the camera-recorder and set to Tape Playback Mode.

3Select the input channel on the TV set and recorder.

4Press the [3] button to select the [1/;] icon to start playback.

≥The image and sound are reproduced.

5Start recording. (Recorder)

6Press the [4] button to select the [∫] icon to stop playback.

7Stop recording. (Recorder)

≥For more information, refer to the operating instructions for your TV set and recorder.

≥When you do not need functional indications or date and time indications, press the [OSD] button on the remote control for no indication. (When you connect the camera-recorder and a recorder with the DV cable, these indications may not appear.)

ªWhen neither image nor sound from the camera-

recorder is output to the TV set

≥Check that the plugs are inserted as far as they go. ≥Check the connected terminal.

27