Panasonic DVC20 Recording yourself, Backlight compensation function, Night view functions

Page 20

DVC20_Eng.book 20 ページ 2005年10月31日 月曜日 午前10時36分

Record mode

Recording yourself

You can record yourself while viewing the LCD monitor. You can record persons in front of the camera while presenting them the image. The image is horizontally flipped as if you see a mirror image. (The image to be recorded is the same as that recording.)

1Rotate the LCD monitor towards the lens side.

When the LCD monitor is opened, the viewfinder will be automatically turned off. If the LCD monitor is rotated towards the lens side though, then the viewfinder will be activated.

When the LCD monitor is rotated towards the lens side, the icon will not be displayed even if you press the [ENTER] button.

Backlight compensation function

This protects a backlit subject from being darkened.

Set to Tape Recording Mode.

1Press the [ENTER] button until the icon 1 appears.

2Press the [1] button to select the backlight compensation icon [].

1

ª

The image on the screen will become brighter.

ªTo return to normal recording

Select the [] icon again.

If you operate the [OFF/ON] switch or the mode switch, the backlight compensation is cancelled.

Night view functions

This function allows you to record color subjects in dark locations to stand out against the background.

Attach the camera-recorder to a tripod, and you can record images free from vibration.

Only manual focusing can be used.

Recorded scene is seen as if frames were missed.

Color night view function

You can record dark locations brightly in color.

0 Lux night view function

You can record completely dark locations with the light of the LCD monitor.

Set to Tape Recording Mode.

1Press the [ENTER] button until the icon 1 appears.

2Press the [3] button to select the night view icon [].

1

Each upward press switches the modes.

OFF # Color night view function # 0 Lux night view function # OFF

3(In the case of 0 lux night view function) Rotate the LCD monitor towards the lens side.

When the LCD monitor is reversed, the Power LCD lamp turns on and the screen is lit in white.

Record the subject while viewing it on the viewfinder. The light of the LCD monitor reaches approx. 1.2 m (3.9

feet) or less.

ªTo cancel the color night view function

Select the night view icon until the night view indication disappear.

If set in a bright place, the screen may become whitish for a

while.

The night view function makes the signal charging time of CCD up to approximately 30k longer than usual, so that dark scenes invisible to the naked eye can be recorded brightly. For this reason, bright dots that are usually invisible may be seen, but this is not a malfunction.

The night view function is cancelled when you operate the power switch or the mode switch.

20

Image 20
Contents Operating Instructions VQT????For Remote Controller FCC NoteCamera-Recorder Rating plate is on the underside of the Camera- RecorderImportant Safeguards DVC20Eng.book 4 ページ 2005年10月31日 月曜日 午前10時36分 Contents Before using Standard AccessoriesOptional Accessories Parts identification and handlingEyecup Viewfinder -9 LCD monitor -8Zoom lever W/T -19 Grip belt DC Input socket DC DV terminal DVUsing the LCD monitor Adjust the grip beltLens cap and grip belt Attaching the shoulder strapUsing the viewfinder Power supplyFitting the battery Removing the batteryCharging time and recordable time CGP-D28SWhen the cassette holder does not come out When the cassette holder cannot be housedInserting/removing a cassette Inserting/removing the cassetteSelecting a mode Using the screen displayHow to turn on the power How to turn off the powerSwitching the language Using the menu screenSetting date and time Adjusting LCD monitor/viewfinderRecharging the built-in lithium battery Adjusting the brightness and color levelUsing the remote control Remote controlInstall a button-type battery Remote control usable rangeSelecting the remote control mode Concerning the button-type batteryRecord mode About auto modeCheck before recording Holding the camera-recorder for recordingBlank search function Recording on a tapeCheck the recording Adjusting the Microphone Sensitivity Level Zoom in/out functionDigital zoom function To use the zoom microphone functionTo cancel the color night view function Recording yourselfBacklight compensation function Night view functionsSoft skin mode Tele-macro functionFade in/fade out function Wind noise reduction functionImage stabilizer function Recording in various situations Scene modeRecording images for wide-screen TVs Recording in natural colors White balance Manual focus adjustment Manual shutter speed/aperture adjustmentTo restore to automatic adjustment Shutter speed rangeSlow-motion playback/frame-by-frame playback Playback modePlaying back tape Press the OSD button on the remote control Variable-speed search functionPlayback on TV To display the on-screen information on the TVEdit mode Edit modeCopying onto a DVD recorder or a VCR Dubbing ≥The image and sound are reproducedUsing the DV Cable for Recording Digital Dubbing To cancel the standby for recordingAudio dubbing Before recording with audio dubbingTo play back the sound recorded with audio Dubbing You can add music or narration to the recorded cassetteMenu Menu listTape Recording Menu Tape Playback MenuOther menus Menus related to taking picturesMenus related to playback Others IndicationsBefore requesting repair Problems and solutions Functions cannot be used simultaneouslyOriginal sound was erased when audio dubbing was performed RecordingInserted Cassette cannot be insertedAbout condensation About dirty headsAbout the battery Be sure to detach the battery after usePrepare spare batteries when going out for recording About the camera-recorderAbout the AC adapter About the cassetteLCD monitor/viewfinder Periodical check-upsExplanation of terms Automatic white balanceWhite balance Auto focusSpecifications SpecificationsSpecifications Executive Office Southeast RegionCentral Region Government Marketing Department