Panasonic AJ-HDX400E Selecting the user menus, To increment the value, To decrement the value

Page 38

Chapter 4 Adjustments and settings for recording

2 Turn the JOG dial button to move the arrow (cursor) to the item which is to be set, and the sub menu screen appears when the JOG dial button is pressed.

**** MAIN MENU ****

SYSTEM SETTING

PAINT

VF

#OPERATION FILE MAINTENANCE VTR MENU

USER MENU SELECT

3 Turn the JOG dial button to move the arrow (cursor) to the item which is to be set, and the setting item menu screen appears when the JOG dial button is pressed.

< OPERATION >

CAMERA ID

SHUTTER SPEED

SHUTTER SELECT

#USER SW SW MODE

WHITE BALANCE MODE USER SW GAIN IRIS

4 Turn the JOG dial button to move the arrow (cursor) to the item which is to be set, and the item’s setting flashes when the JOG dial button is pressed.

< USER SW >

 

# USER MAIN SW

:S.GAIN

USER1 SW

:D.ZOOM

USER2 SW

:DS.GAIN

5 Turn the JOG dial button to change the setting.

To increment the value

Turn the JOG dial button in the clockwise direction as viewed from the front of the camera.

To decrement the value

Turn the JOG dial button in the counterclockwise direction as viewed from the front of the camera.

Each time the button is turned, the number changes by one increment. When it is turned quickly, the number changes quickly, and when it is turned slowly, the setting can be adjusted finely.

To set an item to ON or OFF

To set an item to ON, turn the JOG dial button in the clockwise direction as viewed from the front of the camera. Conversely, to set an item to OFF, turn the button in the counterclockwise direction as viewed from the front of the camera.

6 Press the JOG dial button.

The setting stops flashing, and the setting is entered.

7 To change another setting item on the same page, repeat steps 4 to 6.

8 Press the MENU button to exit the menu operations.

The menu setting mode is exited, and operation returns to the normal operation mode.

4-6-3 Selecting the user menus

By performing menu operations, open the USER MENU SELECT page from the MAIN MENU and then open the setting item menu screens, and select only those items required on the USER MENU.

Only the items which have been set are displayed as the USER MENU items. For details on operation, refer to “4-6-2 Basic menu operations.”

< USER MENU SELECT >

(SELECT MODE)

#SYSTEM SETTING PAINT

VF OPERATION FILE MAINTENANCE VTR MENU

<Note>

Setting items are effective when “¢” is displayed. However, the maximum number of items that can be set is 42 in the case of camera related items (3 pages’ worth, with 14 items per page, 14 a 3 = 42) or 14 in the case of VTR related items (1 page’s worth, or 14 items).

38

Image 38
Contents Operating Instructions Lithium Battery VarningTo remove the battery/Verwijderen van de batterij Contents Menu description tables Chapter Maintenance InspectionsChapter Specifications Features of the camera unit Features of the VTR unit System configuration Video camera-recorder AJ-HDX400Power supply and accessory mounting section Rear Audio function section input systemFront Audio function section output system Shooting and recording camera unit CAM. Auto Knee OFF Shooting and recording VTR unitCAM. Auto Knee on BarsSqueeze LT BOXScrop Menu operation section Setup card insertion slotBusy operation mode display lamp Menu buttonTime code related section CTLRemaining tape and remaining battery charge Displays relating to the VTR unit’s operations and modesTCG switch position Display switch Display item Position Time code-related switch settings and display itemsMode displays Displays relating to the time codeViewfinder section Cassette tapes Up to performing the switch settings Basic proceduresFrom providing the power supply to loading the cassette 3When adjusting the white balance on the spot Procedure for shootingAdjust the white balance Tape function buttonsScene-to-scene continuity during rec-pause Scene-to-scene continuityPRE-RECORDING function Interval REC function Retake function When the ONE Shot mode of Interval REC is to be exitedWhen the Retake function is to be exited Checkpoints common to all Interval REC modesDirection of tape travel Rec-pause Rec-review functionNormal playback and playback at different speeds To 10 sec Rec-review operation Rec-pauseWhite balance detection area Adjusting the white balance and black balanceAdjusting the white balance Output CAMMessages relating to white balance adjustment When there is no time to adjust the white balanceWhen the white balance cannot be adjusted automatically White balance memoriesBlack balance memory Adjusting the black balanceAuto W/B BAL switch Use this to execute ABBShutter modes Setting the electronic shutterSetting the shutter mode and speed Viewfinder screen displays relating to the shutterSelecting the recording signals Selecting the recording signals and recording systemSetting the synchro scan mode Selecting the audio input signalsAuto Level Adjusting the audio signal recording levels3 CH3 and CH4 recording levels MICUser bit memory function Setting the time dataSetting the user bits Tape continuity with the user bitsSetting the internal clock’s date and time RegionOperating procedure for external locking Setting the time codeTime code when the battery is replaced Externally locking the time codeTo release the external lock Setting the Umid informationConcerning the user bit setting during external lock ExamplesBasic menu operations Menu configurationMenu displays on the viewfinder screen To decrement the value Selecting the user menusTo increment the value To set an item to on or OFFViewfinder lamp displays Viewfinder screen status display configurationViewfinder screen status displays Selecting the viewfinder screen display itemsDisplay item What is displayed Status when display appears Mode CheckCheck Filter Line MIX Gain Iris override Battery typeRemaining battery ? Iris, f-valueShutter Color temperatureViewfinder screen display selection Speed/modeSetting change/adjustment result messages and display modes Setting the marker displaysSetting the camera ID Mode check screen displays Mode Check button function Marker check screen displays Marker Select button functionSelecting the video output signals Menu-driven function setupSetting the User SW Gain switching Setting items and detailsFunctions which can be selected Setting items and what is setSelecting the F.AUDIO Level control function Data handling Setting the color temperature manuallyHandling the setup card Saving the data settings on the card Setup card operationsFormatting the setup card Selecting the file NoSaving the data settings to the selected file Giving a title to the selected fileLoading the data saved on the card Loading the data of the selected fileLoading the user data How to use the user dataWriting the setting data in the user area Reading the setting data used for the scene files How to use the scene file dataWriting the setting data used for the scene files Scene Read User Data # Scene SEL Write Reset # Read Scene Read User Data Scene SEL1 Write Reset Operation method without performing File menu operations How to use the lens file dataWhite BAL switch Using the Anton Bauer battery pack Supplying the powerAttaching the battery and setting the battery type ReferenceNP-1 type Battery case Using the NP-1 type battery packUsing the V-mount type battery pack Pin no Signal Using an AC power supplyWhen the AJ-B75 AC adapter made by Panasonic is used +12VApprox meters Adjusting the lens flangeLens socket Adjusting the white shading of the lens Storing the lens file data Giving a title to the selected file noReading the lens file data When using a wireless receiver Audio input signal preparationsWhen using the front microphone When using a UniSlot wireless receiverDetaching the unit from the tripod adapter When using an audio componentMounting the unit on a tripod Tripod adapter Tripod headAttaching the shoulder belt Adjusting the position of the shoulder padConnecting the extension control unit AJ-EC3E Example showing use of the SHAN-RC700 rain coverAttaching the Front Audio Level control knob Front AudioInspecting the camera unit Inspections prior to shootingPreparation for inspections Inspecting the VTR unit Automatic audio level adjustment function inspectionManual audio level adjustment function inspection Tape travel inspectionInspections relating to the time code and user bits Inspection using external microphonesSelf-diagnosis function Maintenance NC5FBH Connectors and signalsPush HA16PRM-3SGTape END Battery ENDSlack REC WarningServo Battery Near ENDWireless RF Tape Near ENDRemove the cassette Error codesEmergency eject How to interpret the menu lists Menu configurationHow to open the menus REC Function System ModeCamera Mode Output SEL1 ROP Option ModeGenlock Matrix Color CorrectionLOW Setting MID SettingHigh Setting Additional DTLDirection Skin Tone DTLKNEE/LEVEL =SKIN Tone AreaFlare $ Camera SettingsGamma STDZebra pattern display VF DisplaysVF Marker HoldUser BOX VF INDICATOR1VF INDICATOR2 Camera ID Mode Check IND7 !LED Shutter SpeedShutter Select User SWSplit SW ModeSmpte AribWhite Balance Mode User SW GainCard READ/WRITE FileIris Card R/W SelectSystem Check DiagnosticLens File InitializeWhite Shading BATTERY/TAPEBlack Shading VTR FunctionHYTRON100 Battery SETTING1Manual ENDURA-D*2 ENDURA50*1ENDURA80*1 NP-1BEND Battery SETTING2DIGITAL14 5 MIC/AUDIO1 6 MIC/AUDIO27 TC/UB Umid SET/INFOOption Downcon SettingVTR Diag Data storage RangeVideo System Audio SystemOther Connectors Time Code Input ConnectorTime Code Output Connector Audio Output ConnectorsPanasonic Broadcast Europe Panasonic Marketing Europe GmbH