Panasonic AJ-HDX400E operating instructions How to use the user data, Loading the user data

Page 53

Chapter 4 Adjustments and settings for recording

If one of the following messages appears when the JOG dial button is	Writing the setting data in the user area
pressed, the data cannot be loaded.

Error message	Remedial action

READ NG NO CARD	Insert the card.
(setup card has not been inserted)

READ NG FORMAT ERROR	The card was formatted by a device
(formatting error)	other than the unit.
	Replace the card.

READ NG NO FILE	Save the file data.
(file not found)

READ NG ERROR	Data saved by devices other than unit
(the data cannot be loaded)	cannot be loaded.

7 Press the MENU button to exit the menu operations.

The setting menu is cleared, and the displays showing the unit’s current statuses appear at the top and bottom of the viewfinder screen.

4-9-3 How to use the user data

The setting data can be written in the user area of the unit’s internal memory and data written in the memory can be read from this area.

Use of this data speeds up the process of reproducing suitable setup statuses.

To write the data, first perform a menu operation to open the <INITIALIZE> screen from the FILE page, and to read the user data that has been written, first perform a menu operation to open the <SCENE> screen from the FILE page.

#< INITIALIZE >

READ FACTORY DATA

WRITE USER DATA

#< SCENE >

READ USER DATA

SCENE SEL:1

READ

WRITE

RESET

TITLE1 : ********

1 Perform a menu operation to open the <INITIALIZE> screen.

2 Turn the JOG dial button to move the arrow (cursor) to the WRITE USER DATA item.

		< INITIALIZE >
		READ FACTORY DATA	4
	#	WRITE USER DATA	4
	#	WRITE USER DATA

3 When the JOG dial button is pressed, the following message appears.

WRITE?

YES

#NO

4 Turn the JOG dial button to move the arrow (cursor) to YES, and press the JOG dial button.

The setting data is now written in the user area of the unit’s internal memory.

5 Press the MENU button to exit the menu operations.

Loading the user data

1 Perform a menu operation to open the <SCENE> screen.

2 Turn the JOG dial button to move the arrow (cursor) to the READ USER DATA item.

TITLE2 : ********

TITLE3 : ********

TITLE4 : ********

53

Image 53

Contents Operating Instructions Varning Lithium BatteryTo remove the battery/Verwijderen van de batterij Contents Menu description tables Chapter Maintenance InspectionsChapter Specifications Features of the camera unit Features of the VTR unit Video camera-recorder AJ-HDX400 System configurationPower supply and accessory mounting section Rear Audio function section input systemFront Audio function section output system Shooting and recording camera unit CAM. Auto Knee on Shooting and recording VTR unitCAM. Auto Knee OFF BarsSqueeze LT BOXScrop Busy operation mode display lamp Setup card insertion slotMenu operation section Menu buttonCTL Time code related sectionDisplays relating to the VTR unit’s operations and modes Remaining tape and remaining battery chargeMode displays Time code-related switch settings and display itemsTCG switch position Display switch Display item Position Displays relating to the time codeViewfinder section Cassette tapes Up to performing the switch settings Basic proceduresFrom providing the power supply to loading the cassette Adjust the white balance Procedure for shooting3When adjusting the white balance on the spot Tape function buttonsScene-to-scene continuity during rec-pause Scene-to-scene continuityPRE-RECORDING function Interval REC function When the Retake function is to be exited When the ONE Shot mode of Interval REC is to be exitedRetake function Checkpoints common to all Interval REC modesNormal playback and playback at different speeds Rec-review functionDirection of tape travel Rec-pause To 10 sec Rec-review operation Rec-pauseAdjusting the white balance Adjusting the white balance and black balanceWhite balance detection area Output CAMWhen the white balance cannot be adjusted automatically When there is no time to adjust the white balanceMessages relating to white balance adjustment White balance memoriesAuto W/B BAL switch Adjusting the black balanceBlack balance memory Use this to execute ABBSetting the shutter mode and speed Setting the electronic shutterShutter modes Viewfinder screen displays relating to the shutterSetting the synchro scan mode Selecting the recording signals and recording systemSelecting the recording signals Selecting the audio input signals3 CH3 and CH4 recording levels Adjusting the audio signal recording levelsAuto Level MICSetting the user bits Setting the time dataUser bit memory function Tape continuity with the user bitsRegion Setting the internal clock’s date and timeTime code when the battery is replaced Setting the time codeOperating procedure for external locking Externally locking the time codeConcerning the user bit setting during external lock Setting the Umid informationTo release the external lock ExamplesBasic menu operations Menu configurationMenu displays on the viewfinder screen To increment the value Selecting the user menusTo decrement the value To set an item to on or OFFViewfinder screen status displays Viewfinder screen status display configurationViewfinder lamp displays Selecting the viewfinder screen display itemsMode Check Display item What is displayed Status when display appearsCheck Filter Line MIX Gain Remaining battery Battery typeIris override ? Iris, f-valueViewfinder screen display selection Color temperatureShutter Speed/modeSetting change/adjustment result messages and display modes Setting the marker displaysSetting the camera ID Marker check screen displays Marker Select button function Mode check screen displays Mode Check button functionSetting the User SW Gain switching Menu-driven function setupSelecting the video output signals Setting items and detailsFunctions which can be selected Setting items and what is setSelecting the F.AUDIO Level control function Data handling Setting the color temperature manuallyHandling the setup card Formatting the setup card Setup card operationsSaving the data settings on the card Selecting the file NoGiving a title to the selected file Saving the data settings to the selected fileLoading the data of the selected file Loading the data saved on the cardLoading the user data How to use the user dataWriting the setting data in the user area Reading the setting data used for the scene files How to use the scene file dataWriting the setting data used for the scene files Scene Read User Data # Scene SEL Write Reset # Read Scene Read User Data Scene SEL1 Write Reset Operation method without performing File menu operations How to use the lens file dataWhite BAL switch Attaching the battery and setting the battery type Supplying the powerUsing the Anton Bauer battery pack ReferenceNP-1 type Battery case Using the NP-1 type battery packUsing the V-mount type battery pack When the AJ-B75 AC adapter made by Panasonic is used Using an AC power supplyPin no Signal +12VApprox meters Adjusting the lens flangeLens socket Adjusting the white shading of the lens Giving a title to the selected file no Storing the lens file dataReading the lens file data When using the front microphone Audio input signal preparationsWhen using a wireless receiver When using a UniSlot wireless receiverMounting the unit on a tripod When using an audio componentDetaching the unit from the tripod adapter Tripod adapter Tripod headConnecting the extension control unit AJ-EC3E Adjusting the position of the shoulder padAttaching the shoulder belt Example showing use of the SHAN-RC700 rain coverFront Audio Attaching the Front Audio Level control knobInspecting the camera unit Inspections prior to shootingPreparation for inspections Manual audio level adjustment function inspection Automatic audio level adjustment function inspectionInspecting the VTR unit Tape travel inspectionInspections relating to the time code and user bits Inspection using external microphonesSelf-diagnosis function Maintenance Push Connectors and signalsNC5FBH HA16PRM-3SGSlack Battery ENDTape END REC WarningWireless RF Battery Near ENDServo Tape Near ENDRemove the cassette Error codesEmergency eject How to interpret the menu lists Menu configurationHow to open the menus Camera Mode System ModeREC Function Output SEL1 ROP Option ModeGenlock Color Correction MatrixMID Setting LOW SettingAdditional DTL High SettingKNEE/LEVEL Skin Tone DTLDirection =SKIN Tone AreaGamma $ Camera SettingsFlare STDVF Marker VF DisplaysZebra pattern display HoldUser BOX VF INDICATOR1VF INDICATOR2 7 !LED Mode Check INDCamera ID Shutter SpeedUser SW Shutter SelectSmpte SW ModeSplit AribUser SW Gain White Balance ModeIris FileCard READ/WRITE Card R/W SelectLens File DiagnosticSystem Check InitializeBlack Shading BATTERY/TAPEWhite Shading VTR FunctionHYTRON100 Battery SETTING1Manual ENDURA80*1 ENDURA50*1ENDURA-D*2 NP-1BEND Battery SETTING2DIGITAL14 6 MIC/AUDIO2 5 MIC/AUDIO1Umid SET/INFO 7 TC/UBVTR Diag Downcon SettingOption Data storage RangeAudio System Video SystemTime Code Output Connector Time Code Input ConnectorOther Connectors Audio Output ConnectorsPanasonic Broadcast Europe Panasonic Marketing Europe GmbH