Panasonic AJ-HDX400E Storing the lens file data, Giving a title to the selected file no

Page 63

Chapter 5 Preparation

13 Turn the JOG dial button to move the arrow (cursor) to

Storing the lens file data

 

 

 

 

 

YES, and press the JOG dial button.

The white shading adjustment values can be stored in the unit

 

ACTIVE now appears on the screen. This indicates that

as lens file data.

 

 

 

the white shading is now being automatically

 

 

 

 

compensated. Upon completion of the adjustments, W-

 

 

 

 

Selecting the file No.

 

 

SHD OK is displayed.

 

 

<Note>

 

 

 

 

1 Perform a menu operation to open the <LENS FILE>

 

Depending on the KNEE settings, “LEVEL OVER” may

 

appear on the screen and white shading compensation

screen from the FILE page, and turn the JOG dial button

 

to move the arrow (cursor) to the FILE NO. item.

 

may not be possible. If this is the case, either stop down

 

 

 

 

 

the lens or set the AUTO KNEE OUTPUT switch to OFF,

2 When the JOG dial button is pressed, the file number

 

then perform a menu operation to open the

 

5

<KNEE/LEVEL> screen from the PAINT screen, select

starts flashing.

Turn the JOG dial button and select the

“OFF” as the MANUAL KNEE item setting, and repeat

lens file (1 to 8) in which the data is to be stored.

steps 4 through 9. After “W-SHD OK” has appeared on

< LENS FILE >

 

 

the display, select “ON” again as the MANUAL KNEE

 

 

 

 

 

item setting.

# FILE NO.

:1

 

 

READ

 

 

 

WRITE

14 When the lens is provided with an extender, turn on the extender function, and repeat steps 7 to 13.

The adjustment values of the two resulting patterns–one when the lens extender is provided and the other when it is not provided–are stored in the unit as the data of one lens file.

TITLE : ************

1:5:

2:6:

3:7:

4:8:

This now completes the white shading adjustments.

The adjustment values are now stored in the non-volatile memory so that even when the unit’s power is turned off, there will be no further need to perform the white shading adjustment.

3 Press the JOG dial button to enter the lens file.

Giving a title to the selected file NO.

4 Turn the JOG dial button to move the arrow (cursor) to the “TITLE:” item.

< LENS FILE >

 

FILE NO.

:1

READ

 

WRITE

 

#TITLE : ************

1:5:

2:6:

3:7:

4:8:

5 When the JOG dial button is pressed, the arrow (cursor) moves to the title input area, and the input mode is established.

< LENS FILE >

 

FILE NO.

:1

READ

WRITE

;

TITLE : ************

1:5:

2:6:

3:7:

4:8:

63

Page 62 Page 64
Image 63
Page 62 Page 64
Contents Operating Instructions Varning Lithium BatteryTo remove the battery/Verwijderen van de batterij Contents Chapter Maintenance Inspections Chapter SpecificationsMenu description tables Features of the camera unit Features of the VTR unit Video camera-recorder AJ-HDX400 System configurationPower supply and accessory mounting section Audio function section input system FrontRear Audio function section output system Shooting and recording camera unit Bars Shooting and recording VTR unitCAM. Auto Knee on CAM. Auto Knee OFFLT BOX ScropSqueeze Menu button Setup card insertion slotBusy operation mode display lamp Menu operation sectionCTL Time code related sectionDisplays relating to the VTR unit’s operations and modes Remaining tape and remaining battery chargeDisplays relating to the time code Time code-related switch settings and display itemsMode displays TCG switch position Display switch Display item PositionViewfinder section Cassette tapes Basic procedures From providing the power supply to loading the cassetteUp to performing the switch settings Tape function buttons Procedure for shootingAdjust the white balance 3When adjusting the white balance on the spotScene-to-scene continuity PRE-RECORDING functionScene-to-scene continuity during rec-pause Interval REC function Checkpoints common to all Interval REC modes When the ONE Shot mode of Interval REC is to be exitedWhen the Retake function is to be exited Retake functionTo 10 sec Rec-review operation Rec-pause Rec-review functionNormal playback and playback at different speeds Direction of tape travel Rec-pauseOutput CAM Adjusting the white balance and black balanceAdjusting the white balance White balance detection areaWhite balance memories When there is no time to adjust the white balanceWhen the white balance cannot be adjusted automatically Messages relating to white balance adjustmentUse this to execute ABB Adjusting the black balanceAuto W/B BAL switch Black balance memoryViewfinder screen displays relating to the shutter Setting the electronic shutterSetting the shutter mode and speed Shutter modesSelecting the audio input signals Selecting the recording signals and recording systemSetting the synchro scan mode Selecting the recording signalsMIC Adjusting the audio signal recording levels3 CH3 and CH4 recording levels Auto LevelTape continuity with the user bits Setting the time dataSetting the user bits User bit memory functionRegion Setting the internal clock’s date and timeExternally locking the time code Setting the time codeTime code when the battery is replaced Operating procedure for external lockingExamples Setting the Umid informationConcerning the user bit setting during external lock To release the external lockMenu configuration Menu displays on the viewfinder screenBasic menu operations To set an item to on or OFF Selecting the user menusTo increment the value To decrement the valueSelecting the viewfinder screen display items Viewfinder screen status display configurationViewfinder screen status displays Viewfinder lamp displaysMode Check Display item What is displayed Status when display appearsCheck Filter Line MIX Gain ? Iris, f-value Battery typeRemaining battery Iris overrideSpeed/mode Color temperatureViewfinder screen display selection ShutterSetting the marker displays Setting the camera IDSetting change/adjustment result messages and display modes Marker check screen displays Marker Select button function Mode check screen displays Mode Check button functionSetting items and details Menu-driven function setupSetting the User SW Gain switching Selecting the video output signalsSetting items and what is set Selecting the F.AUDIO Level control functionFunctions which can be selected Setting the color temperature manually Handling the setup cardData handling Selecting the file No Setup card operationsFormatting the setup card Saving the data settings on the cardGiving a title to the selected file Saving the data settings to the selected fileLoading the data of the selected file Loading the data saved on the cardHow to use the user data Writing the setting data in the user areaLoading the user data How to use the scene file data Writing the setting data used for the scene filesReading the setting data used for the scene files Scene Read User Data # Scene SEL Write Reset # Read Scene Read User Data Scene SEL1 Write Reset How to use the lens file data White BAL switchOperation method without performing File menu operations Reference Supplying the powerAttaching the battery and setting the battery type Using the Anton Bauer battery packUsing the NP-1 type battery pack Using the V-mount type battery packNP-1 type Battery case +12V Using an AC power supplyWhen the AJ-B75 AC adapter made by Panasonic is used Pin no SignalAdjusting the lens flange Lens socketApprox meters Adjusting the white shading of the lens Giving a title to the selected file no Storing the lens file dataReading the lens file data When using a UniSlot wireless receiver Audio input signal preparationsWhen using the front microphone When using a wireless receiverTripod adapter Tripod head When using an audio componentMounting the unit on a tripod Detaching the unit from the tripod adapterExample showing use of the SHAN-RC700 rain cover Adjusting the position of the shoulder padConnecting the extension control unit AJ-EC3E Attaching the shoulder beltFront Audio Attaching the Front Audio Level control knobInspections prior to shooting Preparation for inspectionsInspecting the camera unit Tape travel inspection Automatic audio level adjustment function inspectionManual audio level adjustment function inspection Inspecting the VTR unitInspection using external microphones Self-diagnosis functionInspections relating to the time code and user bits Maintenance HA16PRM-3SG Connectors and signalsPush NC5FBHREC Warning Battery ENDSlack Tape ENDTape Near END Battery Near ENDWireless RF ServoError codes Emergency ejectRemove the cassette Menu configuration How to open the menusHow to interpret the menu lists Output SEL System ModeCamera Mode REC FunctionOption Mode Genlock1 ROP Color Correction MatrixMID Setting LOW SettingAdditional DTL High Setting=SKIN Tone Area Skin Tone DTLKNEE/LEVEL DirectionSTD $ Camera SettingsGamma FlareHold VF DisplaysVF Marker Zebra pattern displayVF INDICATOR1 VF INDICATOR2User BOX Shutter Speed Mode Check IND7 !LED Camera IDUser SW Shutter SelectArib SW ModeSmpte SplitUser SW Gain White Balance ModeCard R/W Select FileIris Card READ/WRITEInitialize DiagnosticLens File System CheckVTR Function BATTERY/TAPEBlack Shading White ShadingBattery SETTING1 ManualHYTRON100 NP-1B ENDURA50*1ENDURA80*1 ENDURA-D*2Battery SETTING2 DIGITAL14END 6 MIC/AUDIO2 5 MIC/AUDIO1Umid SET/INFO 7 TC/UBData storage Range Downcon SettingVTR Diag OptionAudio System Video SystemAudio Output Connectors Time Code Input ConnectorTime Code Output Connector Other ConnectorsPanasonic Broadcast Europe Panasonic Marketing Europe GmbH
Top Page Image Contents