Panasonic AJ-HDX400E operating instructions 5 MIC/AUDIO1, 6 MIC/AUDIO2

Chapter 7 Menu description tables

7-8-5 MIC/AUDIO1

Item/	Variable		Remarks
Data storage	range
FRONT VR CH1	FRONT	For setting whether or not to make the audio
	W.L.	control operational for the input system
	REAR	selected for CH1.
	ALL
C U F	OFF
FRONT VR CH2	FRONT	For setting whether or not to make the audio
	W.L.	control operational for the input system
	REAR	selected for CH2.
	ALL
C U F	OFF
MIC LOWCUT CH1	FRONT	For selecting the microphone low-cut filter for
	REAR	CH1.
	W.L.
C U F	OFF
MIC LOWCUT CH2	FRONT	For selecting the microphone low-cut filter for
	REAR	CH2.
	W.L.
C U F	OFF
MIC LOWCUT CH3	FRONT	For selecting the microphone low-cut filter for
	REAR	CH3.
	W.L.
C U F	OFF
MIC LOWCUT CH4	FRONT	For selecting the microphone low-cut filter for
	REAR	CH4.
	W.L.
C U F	OFF
LIMITER CH1	ON	For selecting the limiter for CH1.
C U F	OFF
LIMITER CH2	ON	For selecting the limiter for CH2.
C U F	OFF
AUTO LEVEL CH3	ON	For selecting the method used to set the level.
C U F	OFF
AUTO LEVEL CH4	ON	For selecting the method used to set the level.
C U F	OFF
REC CH3/CH4	SW	For selecting the signals to be recorded for
	CH1/2	CH3 and CH4.
		SW:	The signals complying with the
			position of the CH3/CH4 selector
			switch on the side panel are recorded.
		CH1&2: The same signals for CH1 and CH2
			are recorded for CH3 and CH4. The
			CH3&4 input circuit is set to the
C U F			power-saving mode.
CUE REC SELECT	CH1	For selecting the signals to be recorded for
	CH2	the CUE channel.
C U F	CH1+CH2
TEST TONE	NORMAL	For selecting the test signal.
	ALWAYS	NORMAL: The test tone signal is output to all
	OFF		the channels when the CAM/BAR
	CHSEL		switch has been set to BAR and the
			CH1 AUDIO IN switch has been set
			to FRONT.
		ALWAYS: The test tone signal is always output
			to all the channels when the CAM/
			BAR switch has been set to BAR.
		OFF:	The test tone signal is not output.
		CHSEL: The test tone signal is output to the
			channels for which the CH1 or CH2
			AUDIO IN switch has been set to
			FRONT when the CAM/BAR switch
			is set to BAR. It is not output to CH3
C U F			or CH4.

7-8-6 MIC/AUDIO2

Item/	Variable	Remarks
Data storage	range
FRONT MIC	ON	For selecting the phantom power supply for
POWER	OFF	the front microphone.
C U F
REAR MIC POWER	ON	For selecting the phantom power supply for
C U F	OFF	the rear microphone.
AUDIO OUT	ON	For setting the audio output circuit.
	OFF	OFF: The power to the output circuit is shut
		down, and the signals of the circuit are
		not output.
		ON: The signals of the audio output circuit
C U F		are output.
MONITOR SELECT	STEREO	For selecting the format of the signals to be
	MIX	output to the monitor.
C U F
FRONT MIC LEVEL	–40dB	For selecting the input level of the front
C U F	–50dB	microphone.
REAR MIC CH1	–50dB	For selecting the input level of the rear
LVL	–60dB	microphone.
C U F
REAR MIC CH2	–50dB	For selecting the input level of the rear
LVL	–60dB	microphone.
C U F
REAR LINE IN LVL	0dB	For selecting the rear line input level.
C U F	+4dB
AUDIO OUT LVL	0dB	For selecting the rear audio output level.
C U F	+4dB
HEADROOM	18dB	For setting the headroom (reference level).
C U F	20dB
WIRELESS WARN	ON	For selecting whether or not to output
	OFF	warnings when the reception of the wireless
C U F		receiver is poor.

7

97