Preparation
Inserting the Card
[Preparation]
1,4
2
3,7
5,6
•Check that the power switch is set to [OFF] and the lens is stored.
[Inserting the card]
1Slide the door in the direction of the arrow to open the Memory Card door.
2Insert the card all the way in until it clicks.
•Check the direction of the card.
•Do not touch the connection terminals on the back side of the card.
3Slide the door in the direction of the arrow to close the Memory Card door.
[Removing the card]
4Slide in the direction of the arrow to open the Memory Card door.
5Press the card to release.
6Pull the card out.
7Slide the door in the direction of the arrow to close the Memory Card door.
•If you are using a MultiMediaCard type memory card and the Memory Card door cannot close, the card may be installed backwards. Remove the card and reverse it, then try to close the door again.
•If the Memory Card door cannot be completely closed, take the card out and insert it again.
•We recommend that you use a Panasonic branded SD Memory Card. (Use only the genuine card)
•If the card is not fully inserted, the card may be damaged.
16