Recording images (basic)
Taking Pictures
1
2,3
2
2048 |
F2.8 1/250
By only pressing the shutter button, the exposure (shutter speed and aperture value) will be automatically adjusted and the picture will be taken.
[Preparation]
•Insert the card. (P16)
•Set the power switch to [ON]. (P18)
1Set the mode dial to normal picture mode [].
2[A Optical finder]
Center the subject in the AF target 1 inside the optical finder and press the shutter button halfway.
[B LCD monitor]
After centering the subject in the
AF area 2 on the LCD monitor, press the shutter button halfway.
•When the focus is adjusted, the focus indication [¥] 3 appears.
•When the focus indication flashes, the focus is not adjusted. Press the shutter button halfway to adjust the focus again.
•The shutter speed and the aperture value 4 are automatically adjusted and displayed on the LCD monitor.
•When the subject is out of the AF area, use the AF/AE lock. (P46)
3Press the shutter button fully to take the picture.
•After taking a picture, when the auto review (P72) is set to [1SEC.]/[3SEC.], the picture is displayed on the LCD monitor for 1 or 3 seconds.
25