Recording images (basic)
Recording Motion Images
1 2,3,4
2
35S
With this camera you can also record motion images. (If using the supplied 16MB SD Memory Card, it is possible to record for up to about 80 seconds)
1Set the mode dial to motion image mode [
].
2Center the subject on the LCD monitor and press the shutter button halfway.
•When the focus is adjusted, the focus indication 2 [¥] appears.
3By pressing the shutter button fully, the recording starts.
•The audio REC starts simultaneously. (1 Microphone)
4By pressing the shutter button fully again, recording stops.
•If during the recording the memory of the card becomes full, the recording is stopped automatically.
•Audio cannot be played back from this camera. Connect to a television or PC to play back audio.
•The picture size is fixed to 320a240 pixels.
•The remaining time displayed on the LCD monitor is an approximation.
•You cannot record motion images without audio.
•If using the MultiMediaCard, after recording motion images, the card access indication and the flash/access indicator may appear for a while, but this is not a malfunction.
•After recording starts, the auto focus/zoom/white balance/aperture values are locked (with the first frame).
•Recording could suddenly stop when recording motion images with cards other than a Panasonic SD Memory Card.
•When the motion image recorded with this camera is played back on other equipment, the quality of pictures and sounds may be deteriorated or pictures may not be able to be played back.
•In motion image mode [
], review cannot be used.
29