Technical use
Playing Back Images with a TV Monitor
By connecting the camera to a television via the supplied A/V cable 1, it is possible to view and play back the recorded images.
USB
2 | A/V OUT |
| DC IN |
1
[Preparation]
• Turn the camera and the television off.
1Connect the A/V cable 1 to the A/V OUT socket of the camera.
2Connect the A/V cable to the video in and the audio in sockets of the TV.
•Yellow: to the video in socket
•White: to the audio in socket
3Turn the television on and select external input.
4Turn the camera on and then set the mode dial to playback [ ].
•The image is displayed on the television.
ªViewing images in other countries
When setting [VIDEO OUT] on the menu, you can view images on a TV in other countries (regions) which use the NTSC or PAL system.
•Even if you set menu selection for [VIDEO OUT] to [PAL], the output signal is still NTSC.
•When connecting to a TV, use new batteries or the AC adaptor (optional,
•Do not use any other cables except the supplied one.
•The A/V cable cannot be connected to the “antenna” connection of your television. Your TV must provide separate audio and video connections for this feature to operate correctly.
•Read the TV operating instructions too.
78