1:The power does not turn on.
1-1: Are the batteries inserted? Check whether the batteries are inserted.
1-2: Is the battery power sufficient?
2:As the power is turned on, it turns
off immediately.
2-1: Is the battery power insufficient to operate the camera? Replace it with new one.
2-2: Are the batteries other than the recommended ones?
3:The image cannot be recorded. 3-1: Is the Memory Card inside?
3-2: Is the mode dial correctly set? Check it.
3-3: There is no memory capacity left on the card. Before recording, delete some images.
4:The image is not displayed on the
LCD monitor.
4-1: Is the LCD monitor set to OFF?
4-2: Does the economy mode work?
5:The LCD monitor is too bright or
dark.
5:Adjust the brightness of the LCD monitor.
6:Flash does not light.
6:The flash mode is set to forced OFF. Change the flash mode.
7:The display or images on the LCD
monitor are not focused.
7:Set the mode dial to the mode corresponding to the distance to the subject.
8:The image will not play back. 8-1: Is the Memory Card inside?
8-2: There is no image in the Memory Card.
8-3: The mode dial is not set to playback
[ 
].
9:The image is not displayed on the
television.
9-1: Is the camera correctly connected with the TV? Check it.
9-2: Set the TV to video input mode.
10: When connecting to a PC, images cannot be transferred.
10-1: Check that the camera is correctly connected to the PC.
10-2: Is the camera correctly recognized by the PC?
11: The clock setting is reset.
11-1: If you do not use the camera for a long time, the clock setting may be reset. When the message [PLEASE SET THE CLOCK] appears, set the clock again.
11-2: When you take a picture before setting the clock, [0.0.0 0:00] is recorded.
