Panasonic DMC-LS1PP About the Batteries, Usable batteries, When oxyride batteries are selected

Page 13

Preparation

About the Batteries

∫Usable batteries

AA Oxyride batteries (supplied)¢

AA Alkaline batteries (optional)

AARechargeable Ni-MH (nickel-metal hydride) batteries (optional)

¢The oxyride battery is a new type of non-rechargeable battery developed by Panasonic.

Oxyride batteries have higher power and more stability to handle the higher load on the batteries, compared to conventional alkaline batteries.

Oxyride batteries are specially designed to use with products as digital still cameras, that place more load on the batteries.

•It is necessary to select the type of batteries according to the batteries you use. Select the type of batteries in use on [BATTERY TYPE] in the [SETUP] menu (P24). The setting can be distinguished by the color of the battery indication (blue or white).

–The battery indication does not appear when you use the camera along with the AC adaptor (DMW-AC1; optional).

2304

5

A: When oxyride batteries are selected

The battery indication turns blue.

B: When alkaline/Ni-MH batteries are selected

The battery indication turns white.

•We recommend that you use Panasonic batteries.

•The performance of the batteries may vary depending on brand or storage terms/condition of the batteries.

•The performance of the batteries may be temporarily deteriorated in low temperature conditions [10oC (50oF) or less]. However, the performance of the batteries is recovered when the batteries become close to the ambient temperature.

•Depending on the temperature or the conditions, the camera may not be operated properly or the battery indication may not be displayed correctly and the batteries may become empty without indication. However, this is not a malfunction.

•We recommend turning the camera off frequently while recording to maintain the power of the batteries for a long time. If you will be using the camera for a long time, using rechargeable Ni-MH batteries is more practical.

•The exhausted batteries may recover some performance when they are left for a period of time. However, they cannot be used for a long time. Be sure to replace with new batteries.

13

VQT0Q58

Image 13

Contents Operating Instructions Dear Customer Information for Your SafetyDMC-LS1 FCC Note U.S. onlyAbout the Lens About Condensation When the lens Is fogged upIf you will not be using the camera for a long time About These Operating Instructions When you press the 4 buttonAbout illustrations in these operating instructions About illustrations of the cursor buttonContents Dpof Print Rotate DispSlide Show TrimmingK1HA08CD0004 Standard AccessoriesK1HA08CD0006 VFC4090Names of the Components 12 13 Play back the pictures Quick GuideWhen alkaline/Ni-MH batteries are selected When oxyride batteries are selectedAbout the Batteries Usable batteriesUnusable batteries Battery indicationShapes of batteries that cannot be used Proper Care and Handling BatteriesPreparation Battery life When you do not use batteries for a long period of timeRecording conditions by Cipa standard SecondsPlayback time Inserting/Removing the Batteries Slide the card door to open it Inserting/Removing the Card OptionalBuilt-in Memory About the Built-in Memory/the CardHttp//panasonic.co.jp/pavc/global/cs Access to the built-in memory or the card Card Approximate number of recordable pictures and the sizeInitial setting Setting Date/Time Clock SetSelect M/D/Y, D/M/Y or Y/M/D Set date and timeAbout the Setup Menu Alkaline LR6/Ni-MH Battery TypePlayback mode only P82 Economy Economy mode onlyNo operational sound Soft operational soundScene Menu Simple mode P35 Recording mode P31Playback mode P49 About the LCD MonitorHistogram Recording guide lineExample of histogram SCN Taking PicturesTake a picture Turn the camera on Select normal picture modeNormal recording AF/AE Lock AF Auto focus AE Auto exposure Jitter camera shake FocusingDirection detection function Exposure Settings in Simple mode PICT.MODE Taking Pictures in Simple ModeSelect the desired item and set the desired value MailOther Settings in Simple mode PICT.SIZE Quality NO.RESET Reset USB Mode Video OUT LanguageCOL.EFFECT PICT.ADJ Press Checking the Recorded Picture ReviewEnlarge and shift the picture To make subjects appear further away use Wide Using the Optical ZoomTo make subjects appear closer use Tele Taking Pictures using the Built-in Flash ISO64 Available flash settings by recording modeDo not stare at the photo flash from close proximity Select the self-timer mode Taking Pictures with the Self-timerTake the picture Under exposed Compensating the ExposureProperly exposed Over exposed Taking Pictures using Auto Bracket Optical image stabilizer button Optical Image StabilizerMODE1 OFFSelect the burst mode Taking Pictures using Burst ModeNumber of pictures recorded in burst mode When the burst mode setting is set to UnlimitedRecording pictures basic Select the picture Playing Back PicturesPictures Multi Playback Switch to multi screenSelect the pictures To return to the normal playbackRotate the zoom lever towards To enlarge the picture Using the Playback ZoomShift the picture ZoomSelect the picture to be deleted Deleting PicturesDelete the picture Select Multi DeleteDelete all of the pictures Delete the picturesSelect ALL Delete To delete all picturesEconomy mode Using the Mode DialSelect Motion Rate Motion image modePress the shutter button fully to start the recording Motion images cannot be recorded with audio Available recording time secondsNight Scenery P59 Night Portrait P60 Scene modeTechnique for Sports mode Technique for Portrait mode To make this mode more effectiveTechnique for Night scenery mode Scenery modeTechnique for Fireworks mode Technique for Night portrait mode Use the flashTechnique for Party mode Party modeUsing the REC mode menu Auto White Balance White Balance W.BALANCEAbout the white balance fine adjustment Setting the White Balance manually White setAbout the white balance Picture Size PICT.SIZE ISO Sensitivity SensitivityISO sensitivity 400 HdtvQuality Quality Example Slow shutter SettingDigital Zoom D.ZOOM Picture Adjustment PICT.ADJColor Effect COL.EFFECT Motion images Playing Back Motion ImagesImages To pauseUsing the Play mode menu Select on to set it Example When rotating clockwiseRotating the Picture Rotate Select the picture to be rotated and set itSelect SINGLE, Multi or Cancel Setting the Picture to be Printed and the NumberSelect the direction to rotate the picture To print the date To cancel all settings Select YES to cancel all settingsPreventing Accidental Erasure of the Picture Protect CancelSET Set the items of the Slide Show Playing Back with Slide ShowSelect Start By pressing the Menu button, the Slide Show stopsSelect the picture and set it Resizing the Pictures ResizeSelect the size and set it SD Slide ShowSelect YES or no and set it Trimming the PicturesSelect the picture to trim and set it Shift the picture and press the shutter button to set Enlarge or decrease the pictureSelect the direction to copy the picture data Copying Picture Data CopySelect pictures to be copied and set them Select YES and set itSelect YES to format the medium Initializing the Built-in Memory Card FormatPlayback advanced Connect the video cable to the video input socket of the TV Playing Back Pictures on a TV ScreenPlaying back pictures with video cable supplied Playback pictures on TV with SD Memory Card slotUSB Mode Before Connecting to the PC or the PrinterSelect USB Mode Select PC or PictBridge PTPWindows Connecting to a PCMacintosh Folder Composition PictBridge PTP settingMisc DcimPICTURE. P87 Connecting to a PictBridge-compliant PrinterPICTURE. P88 Select a picture to be printed Set the print settingsSingle picture Select Dpof Picture Select Print Start and then print out the pictureDpof picture Setting the date printing with the Dpof print in advance Recording Screen DisplayRecording in simple mode Playback ImageOthers Dispose of unusable batteries When you go out, bring spare batteriesNo Additional Delete Selections can be Made Message DisplayMemory Card Error Camera cannot be operated even when it is turned on TroubleshootingRecording Picture cannot be recorded Subject is not focused properlyLCD monitor When connecting to a PC, pictures cannot be transferredScreen is too bright or dark Some pixels are inactive or always lit on the LCD monitorSetting for the auto review function is disabled Clock setting is resetOthers Unreadable language was selected by mistake Lens clicksSpecifications Weight DimensionsOperating Temperature FlashAccessory# Digital Camera Accessory SystemFor USA Customers Digital Camera Accessory Order FormRequest for Service Notice For USA Only Limited Warranty Coverage Limited Warranty For USA OnlyCarry-In or Mail-In Service Centralized Factory Servicenter Customer Services Directory For USA OnlyIndex NO.RESET NtscPlaying Back Motion Images NumericsReproduzca las imágenes Spanish Quick Use Guide/Guía rápida en españolMemo Panasonic Canada Inc Panasonic Puerto Rico, Inc