Panasonic DMC-LS1PP Others Unreadable language was selected by mistake, Lens clicks

Page 99

Others

3:The card is not recognized by the PC. (The built-in memory is recognized.)

•Disconnect the USB connection cable and then connect it again with the card inserted into the camera.

4:The pictures cannot be printed with the camera connected to printers.

•Is the printer supporting PictBridge?

–You cannot print pictures with printers which do not support PictBridge (P86).

•Set [USB MODE] to [PictBridge (PTP)]. (P83)

5:Both ends of the picture recorded by setting the picture size to [HDTV] (1920t1080 pixels) are cut out.

•When you order photo studios to print pictures, ask the photo studio if the pictures can be printed with both ends.

•When using the printer with a trimming feature or other feature which cuts out both edges of the pictures, cancel the feature for printing. The feature depends on the printer used.

•Refer to the operating instructions of the printer for details.

∫Others

1:Unreadable language was selected by mistake.

•Press the [MENU] button and select

[ ] icon on the [ SETUP] menu to set the desired language.

3:The lens clicks.

•When brightness has changed due to the zoom or the movement of the camera or other, the lens may click and the picture on the screen may be drastically changed, however, the pictures are not affected.

The sound is caused by automatic adjustment of the aperture.

It is not a malfunction.

4:The clock setting is reset.

•If you do not use the camera for a long time, the clock setting may be reset. When the message [PLEASE SET THE CLOCK] appears, set the clock again.

•When you take a picture before setting the clock, [0:00 0. 0. 0] is recorded.

5:Colors that were actually not around the subject appear on the picture.

•On the camera, color shift may appear by the characteristic of the lens. This is not a malfunction.

2:The setting for the auto review function is disabled.

•Is the camera in burst mode (P47), auto bracket (P45) or motion image mode

[ ] (P55)?

–In these cases, you cannot set the auto review function in the [SETUP] menu.

99

VQT0Q58

Image 99

Contents Operating Instructions Dear Customer Information for Your SafetyDMC-LS1 FCC Note U.S. onlyAbout the Lens About Condensation When the lens Is fogged upIf you will not be using the camera for a long time About illustrations of the cursor button When you press the 4 buttonAbout These Operating Instructions About illustrations in these operating instructionsContents Trimming Rotate DispDpof Print Slide ShowVFC4090 Standard AccessoriesK1HA08CD0004 K1HA08CD0006Names of the Components 12 13 Play back the pictures Quick GuideUsable batteries When oxyride batteries are selectedWhen alkaline/Ni-MH batteries are selected About the BatteriesProper Care and Handling Batteries Battery indicationUnusable batteries Shapes of batteries that cannot be usedPreparation Seconds When you do not use batteries for a long period of timeBattery life Recording conditions by Cipa standardPlayback time Inserting/Removing the Batteries Slide the card door to open it Inserting/Removing the Card OptionalAbout the Built-in Memory/the Card Built-in MemoryHttp//panasonic.co.jp/pavc/global/cs Access to the built-in memory or the card Card Approximate number of recordable pictures and the sizeSet date and time Setting Date/Time Clock SetInitial setting Select M/D/Y, D/M/Y or Y/M/DAbout the Setup Menu Alkaline LR6/Ni-MH Battery TypeSoft operational sound Economy Economy mode onlyPlayback mode only P82 No operational soundScene Menu About the LCD Monitor Recording mode P31Simple mode P35 Playback mode P49Recording guide line HistogramExample of histogram SCN Taking PicturesTurn the camera on Select normal picture mode Take a pictureNormal recording AF/AE Lock AF Auto focus AE Auto exposure Focusing Jitter camera shakeDirection detection function Exposure Mail Taking Pictures in Simple ModeSettings in Simple mode PICT.MODE Select the desired item and set the desired valueOther Settings in Simple mode NO.RESET Reset USB Mode Video OUT Language PICT.SIZE QualityCOL.EFFECT PICT.ADJ Checking the Recorded Picture Review PressEnlarge and shift the picture Using the Optical Zoom To make subjects appear further away use WideTo make subjects appear closer use Tele Taking Pictures using the Built-in Flash ISO64 Available flash settings by recording modeDo not stare at the photo flash from close proximity Taking Pictures with the Self-timer Select the self-timer modeTake the picture Compensating the Exposure Under exposedProperly exposed Over exposed Taking Pictures using Auto Bracket OFF Optical Image StabilizerOptical image stabilizer button MODE1When the burst mode setting is set to Unlimited Taking Pictures using Burst ModeSelect the burst mode Number of pictures recorded in burst modeRecording pictures basic Select the picture Playing Back PicturesTo return to the normal playback Switch to multi screenPictures Multi Playback Select the picturesZoom Using the Playback ZoomRotate the zoom lever towards To enlarge the picture Shift the pictureSelect Multi Delete Deleting PicturesSelect the picture to be deleted Delete the pictureTo delete all pictures Delete the picturesDelete all of the pictures Select ALL DeleteEconomy mode Using the Mode DialMotion image mode Select Motion RatePress the shutter button fully to start the recording Motion images cannot be recorded with audio Available recording time secondsNight Scenery P59 Night Portrait P60 Scene modeTechnique for Sports mode Technique for Portrait mode To make this mode more effectiveTechnique for Night scenery mode Scenery modeTechnique for Fireworks mode Technique for Night portrait mode Use the flashTechnique for Party mode Party modeUsing the REC mode menu Auto White Balance White Balance W.BALANCESetting the White Balance manually White set About the white balance fine adjustmentAbout the white balance Hdtv ISO Sensitivity SensitivityPicture Size PICT.SIZE ISO sensitivity 400Quality Quality Example Slow shutter SettingPicture Adjustment PICT.ADJ Digital Zoom D.ZOOMColor Effect COL.EFFECT To pause Playing Back Motion ImagesMotion images ImagesUsing the Play mode menu Select the picture to be rotated and set it Example When rotating clockwiseSelect on to set it Rotating the Picture RotateSetting the Picture to be Printed and the Number Select SINGLE, Multi or CancelSelect the direction to rotate the picture To print the date To cancel all settings Select YES to cancel all settingsCancel Preventing Accidental Erasure of the Picture ProtectSET By pressing the Menu button, the Slide Show stops Playing Back with Slide ShowSet the items of the Slide Show Select StartSD Slide Show Resizing the Pictures ResizeSelect the picture and set it Select the size and set itTrimming the Pictures Select YES or no and set itSelect the picture to trim and set it Shift the picture and press the shutter button to set Enlarge or decrease the pictureSelect YES and set it Copying Picture Data CopySelect the direction to copy the picture data Select pictures to be copied and set themSelect YES to format the medium Initializing the Built-in Memory Card FormatPlayback advanced Playback pictures on TV with SD Memory Card slot Playing Back Pictures on a TV ScreenConnect the video cable to the video input socket of the TV Playing back pictures with video cable suppliedSelect PC or PictBridge PTP Before Connecting to the PC or the PrinterUSB Mode Select USB ModeConnecting to a PC WindowsMacintosh Dcim PictBridge PTP settingFolder Composition MiscConnecting to a PictBridge-compliant Printer PICTURE. P87PICTURE. P88 Set the print settings Select a picture to be printedSingle picture Select Print Start and then print out the picture Select Dpof PictureDpof picture Setting the date printing with the Dpof print in advance Recording Screen DisplayRecording in simple mode Playback ImageOthers Dispose of unusable batteries When you go out, bring spare batteriesNo Additional Delete Selections can be Made Message DisplayMemory Card Error Subject is not focused properly TroubleshootingCamera cannot be operated even when it is turned on Recording Picture cannot be recordedSome pixels are inactive or always lit on the LCD monitor When connecting to a PC, pictures cannot be transferredLCD monitor Screen is too bright or darkLens clicks Clock setting is resetSetting for the auto review function is disabled Others Unreadable language was selected by mistakeSpecifications Flash DimensionsWeight Operating TemperatureAccessory# Digital Camera Accessory SystemFor USA Customers Digital Camera Accessory Order FormRequest for Service Notice For USA Only Limited Warranty Coverage Limited Warranty For USA OnlyCarry-In or Mail-In Service Centralized Factory Servicenter Customer Services Directory For USA OnlyIndex NO.RESET NtscPlaying Back Motion Images NumericsReproduzca las imágenes Spanish Quick Use Guide/Guía rápida en españolMemo Panasonic Canada Inc Panasonic Puerto Rico, Inc