Recording pictures (basic)
•Hold down the shutter button fully to activate the burst mode.
•When the
•If the flash is activated, you can record only 1 picture.
•When setting auto bracket and the burst mode simultaneously, auto bracket will be performed.
•The ways to control the exposure and the white balance vary depending on the burst mode setting. When the burst mode is set
to [ ] or [ ], they are fixed to the values set for the first picture. (The burst
speed is prioritized.) When the burst
speed is set to [ ], they are adjusted each time you take a picture.
•When setting the burst mode, the auto review function is activated regardless of the setting on the auto review function. (The picture is not enlarged.) Moreover, the settings for the auto review function on the [SETUP] menu are disabled.
•Burst mode is not canceled when the camera is switched off.
•Burst mode will not perform as described if a MultiMediaCard is used in place of an SD Memory Card. The reading/writing speed of a MultiMediaCard is slower than that of an SD Memory Card.
48
VQT0Q58