Playback (advanced)
Playing Back Pictures on a TV Screen
∫Playing back pictures with video cable (supplied)
• Turn the camera and the TV off.
DIGITAL
V.OUT
DC IN
3V
1 Connect the video cable A (supplied) to the [V.OUT] socket of the camera.
•Connect the video cable with the [ ] mark facing the [1] mark on the
[V.OUT] socket.
•Hold the plug B to push into or pull out.
2 Connect the video cable to the video input socket of the TV.
• 1 Yellow: to the video input socket
3 Turn the TV on and select external input.
4 Turn the camera on and then set the mode dial to playback mode [ ].
∫Viewing pictures in other countries When setting [VIDEO OUT] on the [SETUP] menu, you can view images on the TV in other countries (regions) which use the NTSC or PAL system.
• Even if you set menu selection for [VIDEO OUT] to [PAL], the output signal is still NTSC in the recording mode.
∫Playback pictures on TV with SD Memory Card slot
A recorded SD Memory Card can be played back on TVs with an SD Memory Card slot.
If you play back pictures recorded using [HDTV] mode on a
(MultiMediaCard may not be played back on TV with SD Memory Card slot.)
•Do not use any other video cables except the supplied one.
•Read the TV operating instructions too.
82
VQT0Q58