Panasonic DMC-LS1PP Connecting to a PictBridge-compliant Printer, PICTURE. P87, PICTURE. P88

Page 86

Connecting to a PC or Printer

Connecting to a PictBridge-compliant Printer

By connecting the camera directly to a printer supporting PictBridge via the USB connection cable (supplied), you can select the pictures to be printed or start printing on the LCD monitor.

Set the print settings such as print quality on the printer beforehand. (Read the printer operating instructions.)

DIGITAL

V.OUT

DC IN

3V

A: USB connection cable (supplied)

B: AC adaptor (DMW-AC1; optional)

1 Turn the camera on and then set [USB MODE] on the [SETUP] menu to [PictBridge (PTP)]. (P83)

2 Turn on the printer.

3 Connect the camera to a printer via the USB connection cable A (supplied).

•Connect the USB connection cable with the [ ] mark facing the [1] mark on the [DIGITAL] socket.

•Hold the plug C to push into or pull out.

When the DPOF

Select [SINGLE

Print is not set.

PICTURE]. (P87)

When the DPOF

Select [DPOF

Print is set. (P72)

PICTURE]. (P88)

•It may take time to print some pictures. Therefore, use batteries with sufficient battery power (P14) or the AC adaptor (DMW-AC1; optional) when you connect to a printer.

•If the remaining battery power becomes low during communication, the status indicator blinks and the alarm beeps. In this case, stop the communication at once.

•Disconnect the USB connection cable after printing.

•Do not use any other USB connection cables except the supplied one.

•If the card is not inserted when the camera is connected to a printer, you can edit or access the picture data in the built-in memory. If the card is inserted, you can edit or access the picture data in it.

•You cannot switch the recording medium between the built-in memory and the card while the camera is connected to the printer. When you want to switch the recording medium, disconnect the USB connection cable, insert (or remove) the card and then connect the USB connection cable to the printer again.

86

VQT0Q58

Image 86

Contents Operating Instructions Information for Your Safety Dear CustomerFCC Note U.S. only DMC-LS1About Condensation When the lens Is fogged up About the LensIf you will not be using the camera for a long time About illustrations in these operating instructions When you press the 4 buttonAbout These Operating Instructions About illustrations of the cursor buttonContents Slide Show Rotate DispDpof Print TrimmingK1HA08CD0006 Standard AccessoriesK1HA08CD0004 VFC4090Names of the Components 12 13 Quick Guide Play back the picturesAbout the Batteries When oxyride batteries are selectedWhen alkaline/Ni-MH batteries are selected Usable batteriesShapes of batteries that cannot be used Battery indicationUnusable batteries Proper Care and Handling BatteriesPreparation Recording conditions by Cipa standard When you do not use batteries for a long period of timeBattery life SecondsPlayback time Inserting/Removing the Batteries Inserting/Removing the Card Optional Slide the card door to open itHttp//panasonic.co.jp/pavc/global/cs About the Built-in Memory/the CardBuilt-in Memory Access to the built-in memory or the card Approximate number of recordable pictures and the size CardSelect M/D/Y, D/M/Y or Y/M/D Setting Date/Time Clock SetInitial setting Set date and timeAbout the Setup Menu Battery Type Alkaline LR6/Ni-MHNo operational sound Economy Economy mode onlyPlayback mode only P82 Soft operational soundScene Menu Playback mode P49 Recording mode P31Simple mode P35 About the LCD MonitorExample of histogram Recording guide lineHistogram Taking Pictures SCNNormal recording Turn the camera on Select normal picture modeTake a picture AF/AE Lock AF Auto focus AE Auto exposure Direction detection function FocusingJitter camera shake Exposure Select the desired item and set the desired value Taking Pictures in Simple ModeSettings in Simple mode PICT.MODE MailOther Settings in Simple mode COL.EFFECT PICT.ADJ NO.RESET Reset USB Mode Video OUT LanguagePICT.SIZE Quality Enlarge and shift the picture Checking the Recorded Picture ReviewPress To make subjects appear closer use Tele Using the Optical ZoomTo make subjects appear further away use Wide Taking Pictures using the Built-in Flash Available flash settings by recording mode ISO64Do not stare at the photo flash from close proximity Take the picture Taking Pictures with the Self-timerSelect the self-timer mode Properly exposed Over exposed Compensating the ExposureUnder exposed Taking Pictures using Auto Bracket MODE1 Optical Image StabilizerOptical image stabilizer button OFFNumber of pictures recorded in burst mode Taking Pictures using Burst ModeSelect the burst mode When the burst mode setting is set to UnlimitedRecording pictures basic Playing Back Pictures Select the pictureSelect the pictures Switch to multi screenPictures Multi Playback To return to the normal playbackShift the picture Using the Playback ZoomRotate the zoom lever towards To enlarge the picture ZoomDelete the picture Deleting PicturesSelect the picture to be deleted Select Multi DeleteSelect ALL Delete Delete the picturesDelete all of the pictures To delete all picturesUsing the Mode Dial Economy modePress the shutter button fully to start the recording Motion image modeSelect Motion Rate Available recording time seconds Motion images cannot be recorded with audioScene mode Night Scenery P59 Night Portrait P60Technique for Portrait mode To make this mode more effective Technique for Sports modeScenery mode Technique for Night scenery modeTechnique for Night portrait mode Use the flash Technique for Fireworks modeParty mode Technique for Party modeUsing the REC mode menu White Balance W.BALANCE Auto White BalanceAbout the white balance Setting the White Balance manually White setAbout the white balance fine adjustment ISO sensitivity 400 ISO Sensitivity SensitivityPicture Size PICT.SIZE HdtvQuality Quality Slow shutter Setting ExampleColor Effect COL.EFFECT Picture Adjustment PICT.ADJDigital Zoom D.ZOOM Images Playing Back Motion ImagesMotion images To pauseUsing the Play mode menu Rotating the Picture Rotate Example When rotating clockwiseSelect on to set it Select the picture to be rotated and set itSelect the direction to rotate the picture Setting the Picture to be Printed and the NumberSelect SINGLE, Multi or Cancel To cancel all settings Select YES to cancel all settings To print the dateSET CancelPreventing Accidental Erasure of the Picture Protect Select Start Playing Back with Slide ShowSet the items of the Slide Show By pressing the Menu button, the Slide Show stopsSelect the size and set it Resizing the Pictures ResizeSelect the picture and set it SD Slide ShowSelect the picture to trim and set it Trimming the PicturesSelect YES or no and set it Enlarge or decrease the picture Shift the picture and press the shutter button to setSelect pictures to be copied and set them Copying Picture Data CopySelect the direction to copy the picture data Select YES and set itInitializing the Built-in Memory Card Format Select YES to format the mediumPlayback advanced Playing back pictures with video cable supplied Playing Back Pictures on a TV ScreenConnect the video cable to the video input socket of the TV Playback pictures on TV with SD Memory Card slotSelect USB Mode Before Connecting to the PC or the PrinterUSB Mode Select PC or PictBridge PTPMacintosh Connecting to a PCWindows Misc PictBridge PTP settingFolder Composition DcimPICTURE. P88 Connecting to a PictBridge-compliant PrinterPICTURE. P87 Single picture Set the print settingsSelect a picture to be printed Dpof picture Select Print Start and then print out the pictureSelect Dpof Picture Setting the date printing with the Dpof print in advance Screen Display RecordingRecording in simple mode Image PlaybackOthers When you go out, bring spare batteries Dispose of unusable batteriesMessage Display No Additional Delete Selections can be MadeMemory Card Error Recording Picture cannot be recorded TroubleshootingCamera cannot be operated even when it is turned on Subject is not focused properlyScreen is too bright or dark When connecting to a PC, pictures cannot be transferredLCD monitor Some pixels are inactive or always lit on the LCD monitorOthers Unreadable language was selected by mistake Clock setting is resetSetting for the auto review function is disabled Lens clicksSpecifications Operating Temperature DimensionsWeight FlashDigital Camera Accessory System Accessory#Digital Camera Accessory Order Form For USA CustomersRequest for Service Notice For USA Only Limited Warranty For USA Only Limited Warranty CoverageCarry-In or Mail-In Service Customer Services Directory For USA Only Centralized Factory ServicenterNO.RESET Ntsc IndexNumerics Playing Back Motion ImagesSpanish Quick Use Guide/Guía rápida en español Reproduzca las imágenesMemo Panasonic Puerto Rico, Inc Panasonic Canada Inc