Panasonic DMCFZ1000 Using the QR code to set up a connection, Install the profile of Image APP

Using the Wi-Fi function

If you are using an iOS device [iPhone/iPod touch/iPad]

Using the QR code to set up a connection

1 Press and hold [Wi-Fi] on the camera.

2Start “Image App” on your smartphone.

3 Select [QR code], and then select [OK].

4Using “Image App”, scan the QR code displayed on the screen of the camera. A QR code

•If you press [MENU/SET] on the camera, the QR code will

be enlarged. When it is difficult to scan the QR code, try enlarging it.

(If the scanning is not successful, move the camera and the

smartphone further away from each other and try again orA use a connection method other than the QR code method.)

5Install the profile of “IMAGE APP”.

• A message will be displayed on the browser.

•If the smartphone is locked with a passcode, enter the

passcode to unlock the smartphone.	IMAGE APP
	Panasonic Corporation

6Press the home button to close the browser.

7Turn on the Wi-Fi function in the setting menu of the smartphone.

Wi-Fi

8Select the SSID displayed on the screen of the camera.

9Return to the home screen, and then start “Image App”. (P57)

• Steps 2 through 6 are not required from the second time on.

58 SQT0196 (ENG)