Panasonic DMC-LS70, DMC-LS75, DMC-LS60 Format, Initializing the built-in memory or a card

Advanced-Viewing

Press [ MENUSET ] to display the [PLAY] mode menu and select the item to set. (P71)

[FORMAT]

0Initializing the built-in memory or a card

Usually, it is not necessary to format the built-in memory and the card. Format them when the message [BUILT-IN MEMORY ERROR] or [MEMORY CARD ERROR] appears.

Press e to select [YES] and then press [MENU/SET].

(The illustration shows the screen when the built-in memory is formatted.)

•Sliding the Write-Protect switch of the SD Memory Card or the SDHC Memory Card to [LOCK] prevents formatting. (P16)

•If the built-in memory or the card cannot be formatted, consult your nearest

Service Center.

For USA assistance, please call: 1-800-272-7033 or

send e-mail to : digitalstillcam@us.panasonic.com

For Canadian assistance, please call:

1-800-99-LUMIX (1-800-995-8649) or send e-mail to: lumixconcierge@ca.panasonic.com

FORMAT

DELETE ALL DATA

ON THE BUILT-IN MEMORY ?

YES

NO

SELECT SET MENU

MENU

SET

•When a card is not inserted, you can format the built-in memory. When a card is inserted, you can format the card.

•If you press [MENU/SET] while formatting the built-in memory, the formatting will stop halfway. (However, all the pictures will be deleted.)

•Once the card is formatted, all data including protected images are irretrievably erased. Please confirm that all data is transferred to your PC before proceeding with format function.

•If the card has been formatted on a PC or other equipment, format it on the camera again.

•Use batteries with sufficient power (P24) or the AC adaptor (DMW-AC6; optional) when formatting.

•During formatting, do not turn the camera off.

•It may take longer to format the built-in memory than the card. (Max. about 15 sec.)

83

VQT1C63