Panasonic DMC-LS60, DMC-LS75, DMC-LS70 operating instructions About the Built-in Memory/the Card

Page 16

Preparation

About the Built-in Memory/the Card

The built-in memory can be used as a temporary storage device when the card being used becomes full.

Built-in Memory [ ]

You can record or play back pictures on the built-in memory when you are not using a card. (The built-in memory cannot be used when a card is inserted.)

The built-in memory capacity is about 27 MB.

Picture size is fixed to QVGA (320×240 pixels) when recording motion pictures to the built-in memory. (P53)

Card [ ]

You can record or play back pictures on a card.

About SD Memory Card (optional), SDHC Memory Card (optional) and MultiMediaCard (optional) (P5)

The SD Memory Card, the SDHC Memory Card and the MultiMediaCard are small, lightweight, removable external memory cards.

The SDHC Memory Card is a memory card standard decided by the SD Association in 2006 for high capacity memory cards more than 2 GB.

The reading/writing speed of the SD Memory Card and the SDHC Memory Card is fast. The SD Memory Card and

the SDHC Memory Card are equipped with a Write-Protect switch

A that can inhibit writing

A

and formatting. (When the

 

switch is slid to the [LOCK]

 

side, it is not possible

 

to write or delete data on the card and format it. When the switch is unlocked, these functions become available.)

This unit supports SD Memory Cards formatted in the FAT12 and FAT16

systems that comply with SD Memory Card Specifications. It also supports SDHC Memory Cards formatted in the FAT32 system.

This unit (SDHC compliant equipment) supports both SD Memory Cards and SDHC Memory Cards. You can use SDHC Memory Cards on equipment that supports them. You cannot use SDHC Memory Cards on equipment that supports SD Memory Cards only. (When you use SDHC Memory Cards on other equipment, make sure to read the equipment’s operating instructions. If you intend to have your pictures printed by someone, first find out if they are able to use SDHC Memory Cards.)

Please confirm the latest information on the following website. http://panasonic.co.jp/pavc/global/cs (This site is in English only.)

Refer to page 104 for the number of recordable pictures and available recording time on a card.

Use the high speed SD Memory Card or the high speed SDHC Memory Card for motion picture recording. (P53)

Save important data in such places as your PC as well. Electromagnetic waves, static electricity, unit malfunctions, card damages and other factors may destroy or erase data.

If the card was formatted on a PC or other equipment, format it again on the camera. (P83)

Keep the Memory Card out of reach of children to prevent swallowing.

16

VQT1C63

Image 16
Contents Illustration shows DMC-LS75Dear Customer Information for Your SafetyMarking sign is located on bottom of the unit Following Applies only in the U.S.A FCC Note U.S. onlyOnly for Canada Only for U.S.AIf you see this symbol This camera is not waterproofAbout Condensation When the lens is fogged up When not using the camera for a long period of timeAbout the Lens Humid placesContents Connecting to other equipment QAdvanced-ViewingOthers FormatStandard Accessories BatteriesCD-ROM InstructionsNames of the Components Quick Guide Insert the batteries. P15Play back the pictures Turn the camera on to take picturesAWhen oxyride batteries are selected BWhen alkaline/Ni-MH batteries are selectedAbout the Batteries Usable batteriesBattery shapes that cannot be used All or part Pole is flat Covering on Battery is peeled OffDo not heat or expose to flame DoctorBattery life When not using the batteries for a long period of timeRecording conditions by Cipa standard Playback time Inserting/Removing the Batteries/Card Optional CardInsert the batteries with the and poles aligned correctly Remove the batteries after useAbout the Built-in Memory/the Card Card You can record or play back pictures on a cardSetting Date/Time Clock Set Set the mode dial to Initial settingMENU/SET button Cursor buttons Mode dial Press MENU/SETAdvanced About the Mode DialSCN Changing the menu settings Using the MenusPress e/r to select the menu item Press e/r to select the setting SettingPress r to select the setup menu Press qAbout the Setup Menu Battery TypePower Save Clock SET P17NO.RESET EconomyTravel Date P55 BeepReset Video OUTTV Aspect Dial Display P18LCD monitor and changes to the display Select normal picture mode Using the flashTaking Pictures Press the shutter button fully to take the pictureUse AF/AE lock or macro mode w in these situations There is backlightGo to page 27 Go toFocus indication lights when the subject is focused Press the shutter button fullyDirection detection function Preventing jitter camera shakeTaking Pictures in Simple Mode Battery TypePress MENU/SET to close the menu Clock SETSensitivity P61 Aspect RATIO/PICT.SIZE/ Quality P62AF Assist Lamp P66 on Travel Date World TimeTaking Pictures with the Zoom EZ is an abbreviation of Extended optical Zoom Picture sizePress e/r to select D.ZOOM and then press q Press r to select on and thenPress MENU/SET to close MenuChecking the Recorded Picture Review Press r REVPress w/q to choose a picture Rotate the zoom lever towards 3 TPress w/q to select the picture Playing Back PicturesPlay back the previous picture Play back the next picture Deleting Pictures To delete a single pictureWhile deleting the picture, a appears on the screen To delete Multi DELETE/ALLScreen when selecting Multi Delete Only when selecting Multi DeletePress w/q to select the picture and then press r to set Press the Display button to switch to the screen to be used Recording mode Playback modeAbout the LCD Monitor LCD monitor LCDAbout guide line display HistogramExample of histogram Properly Exposed B Under Exposed C Over Exposed HistogramCanceling High angle mode Taking Pictures using the Built-in Flash Press q Press e/r or q to switch the flash settingAvailable flash settings by recording mode Available flash range to take picturesISO Available flash rangeISO Limit Shutter speed for each flash mode Flash mode SecNight Scenery P49 Taking Pictures with the Self-timer Press w Press e/r or w to switch Self-timer modeCompensating the Exposure Press MENU/SET to finishOver exposed Properly ExposedShooting with the Intelligent ISO mode Press e/r to select ISO LimitThen press q Press e/r to select the menuTaking Close-up pictures Use a tripod and the self-timer P43 for best resultsFocus range Scene mode Press q to enter the scene mode menu screenPress e/r/w/q to select the scene mode Scene mode help InformationTechnique for Night portrait mode Use the flash Technique to make this mode more effectiveYou cannot change the white balance setting Technique for Night scenery mode Technique for Party modeTechnique for Candle light mode Nightscape can be recorded vividlyAge display setting Birthday settingSelect Birthday SET. and press MENU/SETTake clear pictures of the night sky or other dark subjects Press e/r to select the shutter speed, then press MENU/SETShutter speed becomes slower so use a tripod Technique for Fireworks modeAllows you to take pictures through an airplane window Motion picture mode Press MENU/SET to close the menu Setting the travel date Press e/r/w/q to selectDeparture date and then press Press MENU/SET to exit the menuCanceling the travel date Take a picturePress r to select Home and then press MENU/SET Displaying the time at the travel destinationPress w/q to select your home area and then press MENU/SET Finishing setting the home area If you are setting the home area forUsing the REC mode menu Using the REC mode menuUsing the quick setting Items you can setAdjusting the hue for a more natural picture BalanceAWB Auto White Balance AWBSetting the white balance manually White set Setting the light sensitivitySensitivity ISO sensitivity 100 1250Setting the aspect ratio of pictures Aspect RatioPICT.SIZE/QUALITY Number of pixelsSetting the focus method AF ModeQuality About 1-area-focusing High speed This feature detects jitter and corrects for itStabilizer MODE1Mode or Starry SKY in scene mode BurstShooting in quick succession Focus is fixed in the first pictureCOL.MODE AF Assist LampClock SET Displaying Multiple Screens Multi Playback Rotate the zoom lever towards W to display multiple ScreensPress e/r/w/q to select a picture Example of 25 screensPress e/r/w/q to select a picture and then press MENU/SET Press e/r/w/q to select the date to be played backSelect the month Select the date To return to the 1 screen playback screenUsing the Playback Zoom To stop using the playback zoomRotate the zoom lever towards 3 T to enlarge the picture Rotate the zoom lever towards W or press MENU/SETPlaying Back Motion pictures Press w/q to select a picture with aThen press r to play back To pauseFavorite P73 Using the Play mode menuDate Stamp P75 Slide Show Press e/r to select ALL orPress e to select Start and then press MENU/SET By pressing the r, the Slide Show stopsSetting your favorite pictures Canceling all favoritesFavorite Press r to select on and then press MENU/SETPress w/q to select the picture and then press r Press MENU/SET twice to close the menuRotate DISP./ROTATE b To display the picture rotated Rotate Picture is rotated manuallyDate Stamp Press e/r to select Single or Multi and press MENU/SETPress w / q to choose a picture, then press r Stamping the date on your picturesScreen when you have chosen an image taken at 7M Date print setting in Dpof PrintPress e/r to select YES or no and press MENU/SET Resize TrimmingMulti setting Single settingDpof Print To cancel all settings To print the dateMulti setting/To cancel all settings ProtectPreventing Accidental Erasure of the Picture Rotate SETPress e/r to select YES or no and then press MENU/SET Press w/q to select the size and then press rMaking the picture smaller Aspect ratioTrimming Copy Press MENU/SET several times to close the menuCopying the picture data Are copied onto the card at one timeFormat Initializing the built-in memory or a cardConnecting to a PC Set the camera’s mode dial to a mode other than Print modeWindows MacintoshCard Conditions under which a different folder number is usedConnecting to other equipment Turn on the camera and the printer Set the mode dial to Connecting to a PictBridge-compliant PrinterTo connect Press w/q to select the picture and then press MENU/SET Press e to select Print Start and then press MENU/SETDisconnect the USB connection cable after printing Press e Press e/r to select an item and then press MENU/SETNUM. of Prints Print with DatePaper Size When printing different pictures on 1 sheet of paper LayoutPlaying Back Pictures with a TV Screen Playing back pictures with the supplied cableSet the TV ASPECT. P23 Turn the camera and the TV off Playback pictures on TV with SD Memory Card slotScreen Display Normal picture modeRecording Playback Simple mode P28Enlarge Knock the unit or put a lot of pressure on it Dispose of unusable batteries Bring charged spare batteries when going outBatteries have a limited life Message Display Memory Card Error Format this CARD? Memory Card ErrorMemory Card Error Please Check the Card Read ErrorTroubleshooting Conditions Causes Subject is not Focused properlyIs blurred. The optical Image stabilizer is not100 LCD101 102 103 Number of recordable pictures and available recording time 104Number of recordable pictures Aspect ratio105 106 Available recording time In Motion picture modeVGA Qvga Specifications 107108 109 DIGITAL/V.OUTDigital Camera Accessory System 110Digital Camera Accessory Order Form Accessory # Description Price Each Quantity Total Price111 For USA CustomersRequest for Service Notice For USA Only 112Limited Warranty Coverage Limited Warranty For USA Only113 Carry-In or Mail-In Service 114Centralized Factory Service Center Customer Services Directory For USA Only115 116 Précautions à prendre pour les clients canadiens117 Index 118119 One Panasonic Way, Secaucus, NJ Panasonic Puerto Rico, IncPanasonic Canada Inc Ambler Drive, Mississauga, Ontario, L4W 2T3