Panasonic NV-GS300 Check before recording, Basic camera holding, Check points, About auto mode

Page 24

Record mode

Record mode

Check before recording

Check the following before recording important events such as weddings or when the movie camera has not been used for a long time. Conduct a test recording to make sure that the image recording and the audio recording work properly.

ªBasic camera holding

1)

2)

4)

3)

5)

1)Hold the camera with both hands.

2)Run your hand through the grip belt.

3)Do not cover the microphones or sensors with your hands.

4)Keep your arms near your body.

5)Slightly open your legs.

When you are in the open air, record pictures with the sunlight as far in the background as possible. If the subject is backlit, it will become dark in the recording.

ªCheck points

Grip belt adjustment (-8-)

Open the LCD monitor or extend the viewfinder. (Recording cannot start while the LCD monitor and viewfinder are closed. Even if the LCD monitor and viewfinder are closed during recording, the power will not turn off until recording stops.)

Adjusting LCD monitor/viewfinder (-20-) Power supply (-9-)

Insert a cassette/card (-14-, -15-) Setting date/time (-11-)

Getting the remote control ready (-21-)

Setting SP/LP mode (-24-)

24

ªAbout auto mode

Set the [AUTO/MANUAL/FOCUS] switch to [AUTO], and colour balance (white balance) and focusing will be adjusted automatically.

Auto white balance: -64-

Auto focusing: -65-

Depending on the brightness of the subject etc., the aperture and shutter speed are automatically adjusted for an optimum brightness. (When set to the Tape recording mode: The shutter speed is adjusted to a maximum of 1/250.)

Colour balance and focus may not be adjusted depending on light sources or scenes. If so, manually adjust the white balance and focus.

AUTO

MANUAL

FOCUS

Scene mode setting (-36-) White balance setting (-37-) Shutter speed setting (-38-)

Iris/gain value setting (-38-) Focus setting (-38-)

ªRecording mode

You can switch the tape recording mode.

Set to Tape Recording/Playback Mode.

1Set [BASIC] or [ADVANCED] >>

[REC SPEED] >> [SP] or [LP].

If the LP mode is selected, the recording time will be 1.5 times the SP mode, but some functions will be disabled.

We recommend using the SP mode for important recording.

In order to fully exhibit the performances of the LP mode, we recommend using Panasonic cassettes marked LP mode.

It is not possible to dub audio onto image recorded in the LP mode. (-48-)

In the LP mode, the picture quality will not be degraded in comparison with the SP mode, but mosaic noise may appear on the playback image or some functions may be disabled.

Playback on other digital video equipment or on digital video equipment without the LP mode.

Playback of the image on other digital video equipment recorded in the LP mode.

Slow/frame-by-frame playback.

VQT0T29

Image 24
Contents Operating Instructions Information for your safety VQT0T29 Contents Accessories OptionalParts identification and handling CameraReset button Reset Card access lampSpeaker Audio-video/S-Video output terminal A/V LCD monitor -12Lens hood Tripod receptacle Shoulder strap fixtureFitting the lens cap VW-LF37WE optional One-touch free-style grip beltTo use as a grip belt To use as a hand strapPower supply How to turn on the power How to turn off the powerCharging time and recordable time Turning the camera onSetting date and time Recharging the built-in lithium batteryAbout date/time Using the LCD monitor Using the viewfinderAdjusting the field of view Adjust the focus by sliding the eyepiece corrector knobTo cancel Quick Start ≥Set to Tape/Card Recording ModeQuick Start Open the LCD monitor or extend the ViewfinderWhen the cassette holder does not Come out When the cassette holder cannot be housedInserting/removing a cassette Accidental erasure preventionCard access lamp Inserting/removing a cardConcerning the card SD Memory CardSelecting a mode How to use the joystickBasic joystick operations Joystick and screen displayTape playback mode Card recording mode AUTO/MANUAL/FOCUS switch is set to AutoCard Playback Mode Help mode Switching the languageUsing the menu screen To exit the Help modeAbout the menu setting Operating with remote controlTo exit the menu screen To get back to the previous screenAdjusting LCD monitor/viewfinder Adjusting the brightness and colour LevelOrder to increase the brightness Entire LCD monitor Changing the picture quality on LCD monitorUsing the remote control Remote controlInstall a button-type battery Remote control usable range Selecting the remote control modeConcerning the button-type battery Free style remote control Connect the free style remote control To the cameraAbout the clip on the backside About auto mode Recording modeCheck before recording Basic camera holdingOn-screen display in the tape recording mode ≥Set to Tape Recording ModeRecording on a tape Concerning the remaining tape time Indication on the screenRecording check Blank search functionStopping blank search midway Through On-screen display in the card recording mode ≥Set to Card Recording ModeRecording still pictures onto a card Photoshot To record still pictures clearlyConcerning the focusing area Select the size of still pictures to be Recorded on a cardSelect the picture quality for Photoshot images Recording with a shutter operation EffectZoom in/out function Digital zoom functionAbout the variable speed zoom Function To use the zoom microphone functionRecording yourself Backlight compensation functionColour night view functions To return to normal recordingSoft skin mode Tele macro functionFade in/fade out function Wind noise reduction function Anti-Ground-Shooting AGSUsing the built-in video flash When the video flash is not usedTo adjust the brightness of the video Flash Red eye reduction functionSelf-timer recording To stop the timer midway throughTo Cancel the Wide/43 Function Wide/43 FunctionTo cancel the image stabilizer function ≥Set to Tape/Card Recording Mode Set Advanced O.I.S. onImage stabilizer function Continuous PhotoshotRecording in various situations Scene mode To cancel the scene mode functionRecording in natural colours White balance Manual focus adjustment Manual shutter speed/aperture adjustmentTo restore to automatic adjustment Manual shutter speed adjustment Manual iris/gain adjustmentShutter speed range Iris/gain value rangeTo adjust volume Settings on the audioPlaying back tape Repeat playbackSlow-motion playback/ frame-by-frame playback Variable-speed search functionTo return to normal playback Playback on TV Playing back cardTo display the on-screen information On the TV Move the joystick up to select Icon to start playbackDeleting files recorded on a card To display multiple playback filesAbout the compatibility of still pictures To delete all filesTo complete the settings Formatting a cardProtecting files on a card ≥In order to stop formatting, select noWriting the printing data on a card Dpof setting What is DPOF?Select Cancel ALL in Step To set so that all pictures are not PrintedRecording from a tape onto a card Copying onto a DVD recorder or a VCR DubbingUsing the DV Cable for Recording Digital Dubbing To cancel the standby for recordingAudio dubbing Before recording with audio dubbingTo play back the sound recorded with Audio dubbing You can add music or narration to the recorded cassetteWhen you stop printing halfway Menu list Tape Recording MenuTape Playback Menu Setup Display -52-REMOTE Card Recording MenuCard Playback Menu Basic DATE/TIME -52-PROTECTMenus related to taking pictures Menus related to playbackDemo Mode Other menusJoystick LED Initial SETIndications Basic indicationsRecording indications Playback indicationsConfirmatory indications Textual indicationsFunctions cannot be used simultaneously You are attempting to erase protected filesThere is no ink. Check the connected printer There is no paper. Check the connected printerBefore requesting repair Problems and solutions Power/Body Movie camera power cannot be turned onMovie camera power is turned off automatically Movie camera power does not stay on long enoughRemote control does not function Cassette cannot be removedNo operation other than cassette removal can be performed Screen has changed suddenlyOriginal sound was erased when audio dubbing was performed Different sounds are reproduced at the same timeAudio dubbing cannot be performed Sounds cannot be played backPush the Reset Switch is displayed OthersFrom Attempt to repair the appliance by yourselfWhen the lens is fogged About condensationAbout dirty heads Remove the tape if it is insertedAbout the battery Be sure to detach the battery after useAbout the movie camera While carrying the movie camera, do not drop or bump itAbout the AC adaptor About the cassetteAbout the card Explanation of terms Folder structure of the cardPeriodical check-ups Automatic white balanceWhite balance Auto focusSpecifications SpecificationsHttp//panasonic.co.jp/pavc/global/cs This Site is English onlyAC adaptor VSK0651 S1105Nw0 2500 a