Panasonic NV-GS300 operating instructions Playback on TV, Playing back card

Page 42

Playback mode

Playback on TV

Images recorded by this camera can be played back on a TV.

≥Insert a recorded tape or card into this camera.

1Connect the movie camera and a TV.

 

2

[AUDIO IN]

[S-VIDEO IN]

A/V

[VIDEO IN]

1

≥Connect the movie camera and a TV by using the Multi cable 1.

≥If the TV has an S-Video terminal, then also connect to this terminal 2. It allows you to enjoy more beautiful images. (Do not forget to also connect to the Video and Audio

terminals.)

2Turn on this camera and set the mode dial to the Tape Playback Mode (or Card Playback Mode).

3Select the input channel on the TV.

≥If the images are not played back correctly on the TV (e.g. they are displayed vertically), perform the menu operations in accordance with the aspect ratio of the TV monitor.

Set [SETUP] >> [TV ASPECT] >> [16:9] or [4:3].

4Move the joystick up to select the [1/;]

icon to start playback.

≥The image and audio are output on the TV.

5Move the joystick down to select the [∫] icon to stop playback.

≥Whenever plugging in the S-Video terminal, plug in the VIDEO IN terminal and AUDIO IN terminal, too.

≥Use the AC adaptor to free you from worrying about the battery running down.

ªIf the image or audio from this camera

is not output on the TV

≥Check that the plugs are inserted as far as they go.

≥Check the [12bit AUDIO] settings. (-48-) ≥Check the connected terminal.

≥Check the TV’s input setting (input switch). (For more information, please read the operating instructions for the TV.)

ªTo display the on-screen information

on the TV

The information displayed on the LCD monitor or the viewfinder (operation icon, time code and mode indication, etc.) can be displayed on the TV.

(This operation is only available when using the remote control.)

1Press the [EXT DISPLAY] button on the remote control.

≥Press the button again to erase the information.

Playing back card

≥Set to Card Playback Mode.

(An operation icon automatically appears on the LCD monitor.)

1Operate with joystick.

E: Plays back the previous picture.

D: Plays back the next picture.

1/∫: Slide show (Plays back the still pictures on the card in order) start/pause

≥The power will not turn off when the LCD monitor and the viewfinder are closed and retracted during Tape/Card playback mode.

≥Even if the operation icon does not appear, the previous or next picture can be displayed.

≥While the data on a card are played back, do not operate the mode dial.

≥When the access lamp is lit, do not insert or remove a card.

≥It takes time to display the file depending on the number of pixels of the file.

42

VQT0T29

Page 41 Page 43
Image 42
Page 41 Page 43
Contents Operating Instructions Information for your safety VQT0T29 Contents Parts identification and handling AccessoriesOptional CameraSpeaker Audio-video/S-Video output terminal A/V Reset button ResetCard access lamp LCD monitor -12Lens hood Tripod receptacle Shoulder strap fixtureTo use as a grip belt Fitting the lens cap VW-LF37WE optionalOne-touch free-style grip belt To use as a hand strapPower supply Charging time and recordable time How to turn on the powerHow to turn off the power Turning the camera onSetting date and time Recharging the built-in lithium batteryAbout date/time Adjusting the field of view Using the LCD monitorUsing the viewfinder Adjust the focus by sliding the eyepiece corrector knobQuick Start To cancel Quick Start≥Set to Tape/Card Recording Mode Open the LCD monitor or extend the ViewfinderInserting/removing a cassette When the cassette holder does not Come outWhen the cassette holder cannot be housed Accidental erasure preventionConcerning the card Card access lampInserting/removing a card SD Memory CardBasic joystick operations Selecting a modeHow to use the joystick Joystick and screen displayTape playback mode Card recording mode AUTO/MANUAL/FOCUS switch is set to AutoCard Playback Mode Using the menu screen Help modeSwitching the language To exit the Help modeTo exit the menu screen About the menu settingOperating with remote control To get back to the previous screenOrder to increase the brightness Entire LCD monitor Adjusting LCD monitor/viewfinderAdjusting the brightness and colour Level Changing the picture quality on LCD monitorUsing the remote control Remote controlInstall a button-type battery Remote control usable range Selecting the remote control modeConcerning the button-type battery Free style remote control Connect the free style remote control To the cameraAbout the clip on the backside Check before recording About auto modeRecording mode Basic camera holdingRecording on a tape On-screen display in the tape recording mode≥Set to Tape Recording Mode Concerning the remaining tape time Indication on the screenRecording check Blank search functionStopping blank search midway Through Recording still pictures onto a card Photoshot On-screen display in the card recording mode≥Set to Card Recording Mode To record still pictures clearlySelect the picture quality for Photoshot images Concerning the focusing areaSelect the size of still pictures to be Recorded on a card Recording with a shutter operation EffectAbout the variable speed zoom Function Zoom in/out functionDigital zoom function To use the zoom microphone functionColour night view functions Recording yourselfBacklight compensation function To return to normal recordingSoft skin mode Tele macro functionFade in/fade out function Wind noise reduction function Anti-Ground-Shooting AGSTo adjust the brightness of the video Flash Using the built-in video flashWhen the video flash is not used Red eye reduction functionTo Cancel the Wide/43 Function Self-timer recordingTo stop the timer midway through Wide/43 FunctionImage stabilizer function To cancel the image stabilizer function≥Set to Tape/Card Recording Mode Set Advanced O.I.S. on Continuous PhotoshotRecording in various situations Scene mode To cancel the scene mode functionRecording in natural colours White balance Manual focus adjustment Manual shutter speed/aperture adjustmentTo restore to automatic adjustment Shutter speed range Manual shutter speed adjustmentManual iris/gain adjustment Iris/gain value rangePlaying back tape To adjust volumeSettings on the audio Repeat playbackSlow-motion playback/ frame-by-frame playback Variable-speed search functionTo return to normal playback To display the on-screen information On the TV Playback on TVPlaying back card Move the joystick up to select Icon to start playbackAbout the compatibility of still pictures Deleting files recorded on a cardTo display multiple playback files To delete all filesProtecting files on a card To complete the settingsFormatting a card ≥In order to stop formatting, select noSelect Cancel ALL in Step Writing the printing data on a card Dpof settingWhat is DPOF? To set so that all pictures are not PrintedRecording from a tape onto a card Copying onto a DVD recorder or a VCR DubbingUsing the DV Cable for Recording Digital Dubbing To cancel the standby for recordingTo play back the sound recorded with Audio dubbing Audio dubbingBefore recording with audio dubbing You can add music or narration to the recorded cassetteWhen you stop printing halfway Menu list Tape Recording MenuTape Playback Menu Card Playback Menu Setup Display -52-REMOTECard Recording Menu Basic DATE/TIME -52-PROTECTMenus related to taking pictures Menus related to playbackJoystick LED Demo ModeOther menus Initial SETRecording indications IndicationsBasic indications Playback indicationsConfirmatory indications Textual indicationsThere is no ink. Check the connected printer Functions cannot be used simultaneouslyYou are attempting to erase protected files There is no paper. Check the connected printerMovie camera power is turned off automatically Before requesting repair Problems and solutionsPower/Body Movie camera power cannot be turned on Movie camera power does not stay on long enoughNo operation other than cassette removal can be performed Remote control does not functionCassette cannot be removed Screen has changed suddenlyAudio dubbing cannot be performed Original sound was erased when audio dubbing was performedDifferent sounds are reproduced at the same time Sounds cannot be played backFrom Push the Reset Switch is displayedOthers Attempt to repair the appliance by yourselfAbout dirty heads When the lens is foggedAbout condensation Remove the tape if it is insertedAbout the movie camera About the batteryBe sure to detach the battery after use While carrying the movie camera, do not drop or bump itAbout the AC adaptor About the cassetteAbout the card Periodical check-ups Explanation of termsFolder structure of the card Automatic white balanceWhite balance Auto focusHttp//panasonic.co.jp/pavc/global/cs SpecificationsSpecifications This Site is English onlyAC adaptor VSK0651 S1105Nw0 2500 a
Top Page Image Contents