Panasonic NV-GS300 Recording on a tape, On-screen display in the tape recording mode

Record mode

Recording on a tape

≥Set to Tape Recording Mode.

≥The lens cover opens automatically.

1Press the recording start/stop button to start recording.

2Press the recording start/stop button again to pause recording.

;

≥For the recording time on a tape, refer to -10-. ≥Carry out a recording check (-26-) to verify that

the image is recorded properly.

≥In order to find the unrecorded section, carry out the blank search (-26-).

≥If you want to preserve the original sound recorded when audio dubbing (-48-), set [ADVANCED] >> [AUDIO REC] >> [12bit] to take pictures.

ªOn-screen display in the tape recording mode

1)

0h00m10s00f

R 0:30		2)
	3)¢
100 0.2		4)¢
	5)¢
	6)¢

¢These are only displayed when you press the [PHOTO SHOT] button half way while a card is inserted.

These are not displayed when using the remote control or a free style remote control.

1)Recording time elapse

2)Remaining tape indication

3)Still picture size

4)Card indication (-54-)

5)Number of recordable still pictures (When no picture can be recorded, this indication will flash in red.)

6)Quality of still pictures

ªConcerning the remaining tape time

indication on the screen

≥The remaining tape time is indicated in minutes. (When it reaches less than 3 minutes, the indication starts flashing.)

≥During a 15-second or shorter recording, the remaining tape time indication may not be displayed or the remaining tape time may not be displayed correctly.

≥In some cases, the remaining tape time indication may display remaining tape time that is 2 to 3 minutes shorter than the actual remaining tape time.

25

VQT0T29