Record mode
Start recording. (fade in)
When you start recording, the image/audio disappeared completely and the image/audio gradually appears.
Pause recording. (fade out)
The image/audio gradually disappears. After the image/audio completely disappears, recording stops.
ªTo cancel fading
Select the [
] icon again.
≥The [FADE OFF] indication appears on the screen of the movie camera.
ªTo select the colour for fade in/out
The colour which appears in fading pictures can be selected.
1 Set [ADVANCED] >> [FADE COLOUR] >> [WHITE] or [BLACK].
≥While the fade in/fade out function is selected, it takes several seconds to display the image when you start recording images. Besides, it also takes several seconds to pause recording.
Wind noise reduction function
This reduces the wind noise coming into the microphone when recording.
≥Set to Tape Recording Mode.
1Set [BASIC] >> [WIND CUT] >> [ON].
ªTo cancel the wind noise reduction
function
Set [BASIC] >> [WIND CUT] >> [OFF].
≥The default setting is [ON].
≥Reduces the wind noise depending on the wind strength. (If this function is activated in strong winds, the stereo effect may be reduced. When the wind weakens, the stereo effect will be restored.)
Anti-Ground-Shooting (AGS)
This function prevents unnecessary recording when you forget to pause recording and walk with the camera tilted upside down while recording continues.
≥If the movie camera continues to be tilted upside down from the normal horizontal position while recording on a tape, it is automatically put into recording pause.
AGS:
≥Set to Tape Recording Mode.
1Set [SETUP] >> [AGS] >> [ON].
ªTo cancel Anti-Ground-Shooting
Set [SETUP] >> [AGS] >> [OFF].
32