Gigabyte GA-M61PME-S2P NV Sata RAID function, NV Sata 1 Primary RAID, NV Sata 1 Secondary RAID

NV SATA RAID function

Enables or disables RAID for the integrated SATA 3Gb/s controller. Enabled allows you to configure RAID for individual SATA channel. (Default: Disabled)

NV SATA 1 Primary RAID

Enables or disables RAID for the first channel of the integrated SATA 3Gb/s controller. This item is configurable only if the NV SATA RAID function item is set to Enabled.

(Default: Enabled)

NV SATA 1 Secondary RAID

Enables or disables RAID for the second channel of the integrated SATA 3Gb/s controller. This item is configurable only if the NV SATA RAID function item is set to Enabled.

Onboard Audio Function

Enables or disables the onboard audio function. (Default: Auto)

If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to Disabled.

On-Chip MAC Lan

Enables or disables the onboard LAN function. (Default: Auto)

If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to Disabled.

Onboard LAN Boot ROM

Allows you to decide whether to activate the boot ROM integrated with the onboard LAN chip. (Default: Disabled)

Onboard Serial Port 1

Enables or disables the first serial port and specifies its base I/O address and corresponding interrupt. Options are: Auto, 3F8/IRQ4 (default), 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3, Disabled.

Onboard Parallel Port

Enables or disables the onboard parallel port (LPT) and specifies its base I/O address and corresponding interrupt. Options are: 378/IRQ7 (default), 278/IRQ5, 3BC/IRQ7, Disabled.

Parallel Port Mode

Selects an operating mode for the onboard parallel (LPT) port. Options are: SPP (Standard Parallel Port)(default), EPP (Enhanced Parallel Port), ECP (Extended Capabilities Port), ECP+EPP.

ECP Mode Use DMA

Selects DMA channel for the LPT port in ECP mode. This item is configurable only if Parallel Port Mode is set to ECP or ECP+EPP mode. Options are: 3 (default), 1.

On-Chip USB

Configures the integrated USB controller.

V1.1+V2.0	Enables the integrated USB 1.1 and USB 2.0 controllers. (Default)
V1.1	Enables only the integrated USB 1.1 controller.
Disabled	Disables the integrated USB 1.1 and USB 2.0 controllers.

Disabled will turn off all of the USB functionalities below.

GA-M61PME-S2P Motherboard - 40 -