![](/images/new-backgrounds/1174594/17459469x1.webp)
Standard CMOS Features |
|
|
| |||
|
|
|
| |||
|
| CMOS Setup |
| |||
|
|
| Standard CMOS Features |
|
| |
| Date (mm:dd:yy) | Mon, Dec 15 2008 |
| Item Help | ||
| Time (hh:mm:ss) | 11:52:24 |
| Menu Level | ||
IDE Channel 0 Master | [None] |
|
|
| ||
IDE Channel 0 Slave | [None] |
|
|
| ||
IDE Channel 2 Master | [None] |
|
|
| ||
IDE Channel 3 Master | [None] |
|
|
| ||
| Drive A |
| [1.44M, 3.5"] |
|
| |
| Floppy 3 Mode Support | [Disabled] |
|
|
| |
| Halt On |
| [All, But Keyboard] |
|
| |
| Base Memory |
| 640K |
|
|
|
| Extended Memory | 447M |
|
|
| |
: Move | Enter: Select | F10: Save | ESC: Exit | F1: General Help | ||
| F5: Previous Values | F6: |
| F7: Optimized Defaults | ||
|
|
|
|
|
|
|
Date
Sets the system date. The date format is week
Time
Sets the system time. For example, 1 p.m. is 13:0:0. Select the desired field and use the up arrow or down arrow key to set the time.
IDE Channel 0 Master/Slave
IDE HDD
Press <Enter> to autodetect the parameters of the IDE/SATA device on this channel.
IDE Channel 0 Master/Slave
Configure your IDE/SATA devices by using one of the three methods below:
• | Auto | Lets BIOS automatically detect IDE/SATA devices during the POST. (Default) |
• | None | If no IDE/SATA devices are used, set this item to None so the system will |
|
| skip the detection of the device during the POST for faster system startup. |
• | Manual | Allows you to manually enter the specifications of the hard drive when the |
|
| hard drive access mode is set to CHS. |
Access Mode | Sets the hard drive access mode. Options are: Auto (default), CHS, LBA, | |
|
| Large. |
IDE Channel 2/3 Master
IDE
Press <Enter> to autodetect the parameters of the IDE/SATA device on this channel.
Extended IDE Drive | Configure your IDE/SATA devices by using one of the two methods below: | |||
• | Auto | Lets BIOS automatically detect IDE/SATA devices during the POST. (Default) | ||
• | None | If no IDE/SATA devices are used, set this item to None so the system will | ||
|
| skip the detection of the device during the POST for faster system startup. | ||
Access Mode | Sets the hard drive access mode. Options are: Auto (default), Large. | |||
|
|
|
|
|
|
| - 35 - | BIOS Setup |