Panasonic PV-DV52 Using the LCD Monitor, To adjust the LCD/EVF Brightness or Color, Evf/Lcd

Page 16

Camera Recording

Using the LCD Monitor

The LCD (Liquid Crystal Display) monitor can be used while recording.

1LCD-OPEN

1Press LCD-OPENto unlock the LCD monitor.

2 Swing the LCD monitor fully open and adjust the viewing angle.

The LCD monitor will automatically turn on.

When the LCD monitor is completely closed, it will shut off automatically to save power.

Adjust the LCD Brightness and/or color of the LCD monitor if necessary. Please refer to “To adjust the LCD/ EVF BRIGHTNESS or COLOR” below.

180°

90°

90°

3 Start recording.

Note

Using the LCD monitor will reduce battery operating time.

Close the LCD monitor completely when not in use.

To adjust the LCD/EVF BRIGHTNESS or COLOR

1, 5

MENU

2, 3, 4

JOG KEY

EVF/LCD

1Press MENU to display the main menu screen.

2 Rotate JOG KEY to select LCD/EVF SETTING from the main menu screen. (Menu OSD: pp. 60, 62)

3 Press JOG KEY to display the LCD/ EVF SETTING screen.

4 Press JOG KEY to select LCD BRIGHTNESS, LCD COLOR, or EVF BRIGHTNESS, then rotate JOG KEY to adjust.

5 Press MENU twice to exit this mode.

16

 

Forassistance, pleasecall: 1-800-211-PANA(7262)orsende-mailto:consumerproducts@panasonic.com

Image 16
Contents Operating Instructions Safety Precautions Things You Should KnowAbove markings are located on the appliance bottom cover PV-DV52Important Safeguards Important Safeguards Table of Contents Before Using Unpack your PalmcorderRecord Speed/Playback Time Erase ProtectionAdjust the Length Easy Cassette Eject/InsertionAttaching the Shoulder Strap To remove the cassetteUsing the Built-in Light Hand StrapLens Cap Hold down Light for more than 0.7 seconds to turn on or OFFInsert the Battery Pack Quick GuideInsert Cassette Monitor, and swing it fully openCamera Recording To Watch Playback in the LCD Liquid Crystal DisplayCharge the Battery Pack on the AC Adaptor Insert the Battery Pack Remove the Battery PackAbout the Flashing of the Charge Lamp Batt ReleaseBattery Care Supplying PowerUse AC Adaptor Setting the Clock Set the Date and TimeExample Push RotateUsing the Palmcorder Menu Displaying the MenuCamera Main menu VCR Main menuCamera Recording Simple RecordingClip here EVFUsing the LCD Monitor To adjust the LCD/EVF Brightness or Color180 Start recording EVF/LCDDigital PhotoShot Mode Progressive PhotoShot Mode1POWER 2PHOTOSHOT Photoshot JOG KEY 1POWER 2MENUSet Power to Camera Zoom slowly ZoomRecording Check Zoom quicklyJOG KEY 2MENU 5REC Pause 1POWER Recording Still PicturesSelf Recording 2STILLSpecial Effect Features Cinema ModeJOG KEY 1POWER 2MENU 5REC/PAUSE 1POWER 3BACK LightProgram AE Fade Audio/Video Fade In/OutFade Out KEY 1POWER 2MENU 7REC Pause Camera Still Picture in Picture PinPMain Picture PhotoshotAdvanced Settings For manual White Balance adjustmentWhite Balance Following cases, the indication flashesManual Focus Auto FocusMacro Focus for close-ups JOG KEY 1POWER 2AUTO/MANUAL High Speed ShutterAdjusting the Iris Manually Connecting Earphone not supplied Playback using the LCD MonitorPlayback Your Recordings Adjusting the Volume Repeat PlaybackBlank Search EVF/LCDRStill Picture Rapid Visual SearchFast Forward/Rewind Check Special Effect Feature Rotate JOG KEY to adjustVariable Speed Search Jog Frame by Frame SearchStrobe Multi Mode FastNorm SlowView Recording/Playback on your TV TV with AUDIO/VIDEO in JacksOUT Cable SuppliedDigital Features Repeat steps 2~4 to select OFF to cancel this featureDigital Zoom Zoom In TMagicPix Images JOG KEY 2MENU 1POWER 5PLAYJOG KEY repeatedly to select OFF I.S. may not function when Dual Digital Electronic Image Stabilization System D.E.I.S3REC/PAUSE Bplay To use the Wipe function Other Digital FunctionsTo use the MIX function Editing Features Audio Dubbing using the Built-in MicrophoneSet Power to VCR Press PLAY. Then press 12 bit7PAUSE Press Pause to stop Audio DubbingCopying your Tapes to VHS Cassette Monitor with your TVCopying from Digital Equipment dubbing Recording PalmcorderPause 6STOP 4REC Insert a pre-recorded tape intoPC Connection PC Connection with DV Interface Cable i.LINKTurn on your PC Set the Palmcorder Power to VCR Photovu Link Driver OptionalSystem Requirements for Photovu Link Driver Optional ConnectionPhotovu Link Running the SoftwareUsing Tape Image Data Palmcorder Accessory System Palmcorder Accessory Order Form VisaReplacing the Bulb Handle bulb gently. Excessive force may cause bulb to crackApproximate Brightness Values MixtureSpecifications Before Requesting Service Cleaning Care for Video HeadsTape Operations Caution Lens Hood Area Operation CautionRequest for Service Notice Symptom CorrectionOn-Screen Displays OSD ForLimited Warranty Limited WarrantyCustomer Services Directory Accessory PurchasesPrecauciones para su seguridad Advertencia del FCCInserte el Cassette Inserte de la bateríaFilm de protección Grabación con la cámara Cuando el monitor LCD se enchuentraTotalmente abierto, el visor se Desactiva AutomáticamenteCamera Mode Menu Screen IndexBeep VCR Mode Menu Screen 13 LCD/EVF Setting p 10 C.RESET p10 11 Important Note CAMERA/VCR Mode Index of Controls Front ViewSide View Rear ViewTop View Back ViewTripod Receptacle AC Power Cord pp VCR DC Output Connector Power Lamp Charge LampUnderside View AC Adaptor Menu OSD IndexPhotovu Link

PV-DV52 specifications

The Panasonic PV-DV52 was a compact and versatile camcorder that left an impression in the world of digital video recording during its time. Renowned for its user-friendly design and advanced features, the PV-DV52 catered to both amateur filmmakers and seasoned videographers seeking portability and quality.

One of the primary highlights of the PV-DV52 is its recording capability. This camcorder featured a MiniDV format, allowing users to record high-quality digital video with exceptional clarity. The MiniDV format ensured that the footage produced was crisp and vibrant, making it ideal for capturing special moments or creating home movies.

The PV-DV52 was equipped with a 3CCD imaging system, a notable technology that set it apart from many competitors. Unlike standard camcorders that use a single CCD, the 3CCD system utilized three separate CCD sensors—one for each primary color (red, green, and blue). This design resulted in improved color accuracy, enhanced image detail, and reduced artifacts, producing stunning visuals that truly represented the scene.

Another impressive feature of the PV-DV52 was its optical zoom capabilities. The camcorder came with a 10x optical zoom lens that enabled users to capture distant subjects without compromising quality. Additionally, users could employ a digital zoom feature, further extending their reach when needed. This flexibility made the camcorder ideal for various shooting scenarios, from capturing wildlife at a distance to recording events in large venues.

The PV-DV52 also prioritized ease of use, equipped with a user-friendly interface and intuitive controls. A flip-out LCD screen provided users with the ability to monitor their recordings easily, making framing shots and reviewing footage straightforward. The camcorder had built-in stabilization technology, which minimized the impact of shaky hands while filming, resulting in smoother video playback.

Moreover, the Panasonic PV-DV52 offered a range of connectivity options, including FireWire (IEEE 1394) ports, facilitating easy transfer of video to computers for editing. This feature was particularly significant, as it allowed for a seamless workflow for aspiring filmmakers looking to enhance their content.

Overall, the Panasonic PV-DV52 was a well-rounded and dependable camcorder that leveraged advanced technologies to deliver professional-quality video recording in a compact package. Its combination of 3CCD imaging, optical zoom, and user-friendly features made it a popular choice during its era, appealing to various users seeking to capture life's important moments with ease.