
PROJECTING AN IMAGE FROM THE COMPUTER
zYou can adjust the followings for each image mode. For detailed information on the proce- dures, refer to "Image Adjustment Menu" (P100 to 106).
-Brightness Adjust this when the image is too bright or dark.
- Contrast | Adjust this to decrease or increase contrast of the entire image. |
-Sharpness Adjust this to soften or sharpen an image.
- Gamma | Adjust this when light or dark portions of an image are obscure. |
-Color adjustment
Adjust this to adjust the color level and balance.
-Advanced adjustment
Adjust this when color tones are different from those of the original image.
zThe results of adjustments are saved for each input signal. Once you save them, you can project images with the same settings.
zYou can set an image mode from the menu. Refer to [Image mode] section in the menu (P100)
54