Manuals / Canon / Computer Equipment / Projector

Canon X700, SX7 manual Adjusting the Total Number of Dots, Adjusting the Tracking, Total dots

Models: X700 SX7

1 141

Download 141 pages 24.31 Kb

Page 91

Adjusting the Total Number of Dots

Adjusting the Total Number of Dots

[Total dots]

ANALOG PC

You can select the total number of dots in the horizontal direction. Adjust the number of dots when the image distorts or noise is displayed on the screen at both sides.

T

Display settings

T

Input signal select

T

Total dots

>Increases the total number of dots.

<Decreases the total number of dots.

Press the [MENU] button when you finish.

z Perform this adjustment if the auto PC adjustment function cannot adjust the project image correctly.

zThe setting is recorded for [ANALOG PC-1] and [ANALOG PC-2] sepa- rately.

Setting Display Status

Adjusting the Tracking

[Tracking]

ANALOG PC

You can fine-tune the timing for generating an image from the image signal. Adjust the tracking when the image flickers or distorts.

T

Display settings

T

Input signal select

T

Tracking

							Decreases the set value.		SETTING
	<						Decreases the set value.		SETTING
	>						Increases the set value.
									UP
	Press the [MENU] button when you finish.								UP
	Press the [MENU] button when you finish.								FUNCTIONS
					z	Perform this adjustment if the auto PC			FUNCTIONS
						adjustment function cannot adjust the			FROM
						adjustment function cannot adjust the
						project image correctly.
						project image correctly.
					z The setting is recorded for [ANALOG				MENUS
						PC-1] and [ANALOG PC-2]		sepa-	MENUS
						PC-1] and [ANALOG PC-2]		sepa-

rately.

91

Image 91

Canon X700, SX7 manual Adjusting the Total Number of Dots, Adjusting the Tracking, Total dots

Contents

Setting Up Functions from Menus Maintenance Troubleshooting Appendix User’s ManualTable of contents/Safety Instructions Before Use Setting Up the Projector Projecting an Image from the ComputerComputer Quick Reference - How to start projectionAV Equipment Features of the Multimedia Projector SX7/SX6/SX60/X700 Table of ContentsFreezing the Picture Setting Various Function RISK OF ELECTRIC SHOCK DO NOT OPEN Safety InstructionsSafety Precautions READ AND KEEP THIS OWNERS MANUAL FOR LATER USE a. When the power cord or plug is damaged or frayed European Union and EEA only AC Power Cord RequirementAC Power Cord for the United States and Canada NOTE FOR CUSTOMERS IN THE USCanadian Radio Interference Regulations Federal Communication Commission NoticeDisposal of Waste Lamp Lamp Handling PrecautionsCarrying/Transporting the Projector If a Lamp ExplodesHot Air from Exhaust Vent Installation PrecautionsInstallation Using the Projector at 2300 Meters or More Above Sea LevelMajor Features Features of the Multimedia Projector SX7/SX6/SX60/X700Supplied Manuals Supplied Manuals and Symbols Used in This ManualSymbols of Button Operations Symbols Used in This ManualSetting Up Functions from Menus Maintenance Troubleshooting Appendix BEFORE USETable of contents/Safety Instructions Setting Up the Projector Projecting an Image from the ComputerBefore Use Supplied AccessoriesInstalling the Lens Cap Main Unit of Projector Part NamesMounting the Projector on the Ceiling Bottom SideYou can mount the projector on the ceiling Buttons on the Remote Control and Top Control Top Control SX7/X700 Input Terminals on Main UnitSX6/SX60 1 Input Terminal-1 DIGITAL IN/ANALOG IN-1 P34, 35 The projector is being turned off the lamp is being Indicators on the Top ControlThe image is blackened out NO SHOW Installing Remote Control Batteries Preparing the Remote ControlRemote Control Operating Range Page Projecting an Image from the Computer SETTING UP THE PROJECTORTable of contents/Safety Instructions Before Use Setting Up Functions from Menus Maintenance Troubleshooting AppendixDetermining the Distance to the Screen Setting Up the ProjectorPlacing in Front of the Screen Determining the Installation PositionPlacing on a Level Place Page Setting Up Functions from Menus Maintenance Troubleshooting Appendix PROJECTING AN IMAGE FROM THE COMPUTERTable of contents/Safety Instructions Before Use Setting Up the ProjectorConnecting to Video Terminals Connecting the Projector to the ComputerProjecting an Image from the Computer 5-BNC cable DVI cableCOMPUTER Connecting to AUDIO IN Termi- nals SX7/X700 Connecting to an External MonitorProjector Audio cable Connecting to AUDIO IN Termi- nals SX6/SX60Unplug the Power Cord When the Projector is Not in Use Starting ProjectionConnect the Ground Terminal Selecting a Language Adjusting the Image Size ZOOM Adjusting the ImageIf Keystone Distortion is Too Large Adjusting the Projection AnglePreparing the Computer Determining the Output Resolution of the ComputerFROM THE COMPUTER Projecting the Image from the Notebook ComputerPerforming the Auto Setup 3 Press the AUTO SET button again 2 Press the AUTO SET button. The Auto setup window appearsSelecting an Input Signal PROJECTING AN IMAGE FROM THE COMPUTER 4 Press the OK buttonPROJECTING AN IMAGE FROM THE COMPUTER Adjusting the Focus Adjusting Keystone Distortion z The result of keystone adjustment is memorized. If you place the projector at the same posi- tion, the keystone adjustment is not necessary Setting Up the Computer Screen Automatically AUTO PC Selecting an Image Mode IMAGE Brightness Adjust this when the image is too bright or dark Selecting a Screen Mode Aspect A clear image can be obtained because of no image pro- cessing „ True sizeSelecting Aspect Ratio of the Projecting Image Screen aspect Turning Off the Projector Setting Up the Power Management Function Page Setting Up Functions from Menus Maintenance Troubleshooting Appendix PROJECTING AN IMAGE FROM AV EQUIPMENTTable of contents/Safety Instructions Before Use Setting Up the Projector Projecting an Image from the ComputerProjecting an Image from AV Equipment Connecting the Projector to an AV EquipmentConnecting to Video Terminals Input Terminal-1 SCART cableDigital cable DVI terminalSX7/X700 SX6/SX60 S-VIDEO cableSX7/X700 SX6/SX60 Video cablePROJECTING AN IMAGE FROM AV EQUIPMENT Connecting to AUDIO IN Terminals SX7/X700Audio cable Connecting to AUDIO OUT Termi- nals SX7/X700SX7/X700 Projecting a Video Image from an AV Equipment Selecting an Input Signal Performing the Auto Setup„ Selecting DIGITAL VIDEO „ Selecting SCART z Refer to the table on the page 129 for more detailed information on the screen size for the wide screen Selecting a Screen Mode AspectSelecting Aspect Ratio of the Projecting Image Screen aspect „ 169 D. image shift Page Setting Up Functions from Menus Maintenance Troubleshooting Appendix USEFUL FUNCTIONS AVAILABLE DURING A PRESENTATIONTable of contents/Safety Instructions Before Use Setting Up the Projector Projecting an Image from the ComputerBlackened Out an Image Temporarily Useful Functions Available During a PresentationMuting the Sound Freezing the Picture Adjusting the VolumeDURING A Showing the Elapsed TimePage Up or Down through the Pages USEFUL FUNCTIONS AVAILABLEZooming an Image Operating a Mouse with the Remote Control Pointing with a Spotlight Page Maintenance Troubleshooting Appendix Index SETTING UP FUNCTIONS FROM MENUSTable of contents/Safety Instructions Before Use Setting Up the Projector Projecting an Image from the ComputerHow to Use Menus Setting Up Functions from MenusSymbols Indicating Item Categories This section provides the basic operation on the menu 4 Set the menu item 5 Press the OK button In some menu items, the setting is enabled just by making a selection6 Press the MENU button when you finish. The menu disappears SETTING UP FUNCTIONS FROM MENUSFull screen Setting Display StatusAspect Selecting an Input Signal TypeInput signal select Selecting a Screen Mode480p 1080i1035i 575pTracking Adjusting the Total Number of DotsAdjusting the Tracking Total dotsVertical position Adjusting the Horizontal PositionAdjusting the Vertical Position Horizontal positionVertical pixels Adjusting the Number of HorizontalAdjusting the Number of Vertical Pixels Horizontal pixelsMenu position Performing Progressive ProcessingSelecting a Menu Position ProgressiveImage flip H/V Performing the Ceiling-mounted/Rear ProjectionLogo capture Correcting the Screen ColorCapturing a Logo to Be Projected Screen colorLogo position Displaying a Logo No signal screenNo signal screen Selecting a Logo Display PositionProjector on Displaying a Logo NO SHOWSelecting a Logo at Startup NO SHOWScreen aspect Selecting Aspect Ratio of the ScreenSelecting an Image Mode Setting the Image QualityContrast Adjusting the BrightnessAdjusting the Contrast BrightnessGamma Adjusting the SharpnessMaking a Gamma Correction SharpnessColor adjustment Making Color AdjustmentMaking Color Adjustment Color adjustmentDynamic gamma Disables dynamic gammaMem. color correct Lamp mode 6-axis color adjustReset Resetting the Image SettingsSetting Auto Setup Function Setting Various FunctionSelecting the Power Management Beep Skip the POWER Button OperationDirect power on Enabling/Disabling the BeepLanguage Selecting a Display LanguageGuide Prohibiting the Projector OperationEnabling/Disabling the Guide Message Key lockLED illumination Setting up the Remote ControlRemote control Turning On/Off the LED IlluminationDigital video Setting up the Digital Video Input SignalSetting a Password Password settingsFactory defaults Resetting to the Default SettingLamp counter Resetting the Lamp CounterSetting Up Functions from Menus MAINTENANCETable of contents/Safety Instructions Before Use Setting Up the Projector Projecting an Image from the ComputerCleaning the Projector MaintenanceCleaning the Air Filter Cleaning and Replacing the Air FilterReplacing the Air Filter Replacing Lamp Replacing the LampReplacing the Lamp Page Setting Up Functions from Menus Maintenance TROUBLE- SHOOTINGTable of contents/Safety Instructions Before Use Setting Up the Projector Projecting an Image from the ComputerWARNING Lamp Flash Patterns TroubleshootingYou cannot turn on the projector Symptoms and SolutionsYou cannot project an image from the projector Check whether the distance to the screen is appropriate. If the You cannot hear soundThe projected image is blur You cannot project an image appropriatelyThe projector is forced to be turned off You cannot project an image from a notebook computerVGA function key or a key with an icon for the external moni Check whether you are operating the remote control within the You cannot operate the remote controlYou cannot use the wireless mouse function Check whether batteries are installed correctly. If batteries areTable of contents for Appendix APPENDIXAppendix Supported Computer Signal TypesRelationship between Screen Size and Projecting Distance Analog PC P25, 34 Glossary6-axis color adjust P105 AdobeRGB P53DVI P35, 46, 63 Component P25, 62Composite P25 Digital PC P25Progressive P94 Resolution P42Memorized Color Correction P104 Offset P103Tracking P91 S-video P25, 64Video P25, 64 lens SpecificationsExternal View Index Page z Ceiling-mounting plate Part No RS-CL02 OptionsPage The Display settings menu Menu ConfigurationStandard The Image adjustment menuThe System settings menu Power management mode