Setting Various Function
Setting Auto Setup Function
[Auto setup]
DIGITAL PC 
ANALOG PC
DIGITAL VIDEO 
COMP./SCART 
You can select an item you want to enable in the auto setup function.
T
System settings
T
Auto setup
Select [On] or [Off] for the following items if you want to enable or disable them in the auto setup function, respectively.
Selecting the Power Management
[Power management mode]
DIGITAL PC 
ANALOG PC
DIGITAL VIDEO 
COMP./SCART 
You can turn off the lamp or projector automati- cally for saving power.
T
System settings
T
Power management mode
Auto focus
Auto keystone
Auto input
Auto screen color
Enables/disables the auto focusing.
Enables/disables the auto keystone correction.
Enables/disables the auto input selection.
Enables/disables the auto screen color correction.
Off | Disables | the | power | management |
| mode. |
|
|
|
| Enters | the | power | management |
Standby | ||||
| mode. The projector restarts projec- | |||
| tion when a signal is inputted or any | |||
| operation button is pressed. | |||
| Enters the exit mode and turns off | |||
Exit | ||||
| the projector automatically. | |||
SETTING UP FUNCTIONS
zA confirmation screen appears during the auto setup so that you can check which functions are enabled/disabled (P44, 68).
zYou can manually adjust each item. [Auto focus]: [FOCUS] button (P49) [Auto keystone]: [KEYSTONE] button (P50)
[Auto input]: [INPUT] button (P46, 68)
[Auto screen color]: Menu function (P96)
zIf you select [16:9 D. image shift] for [Screen aspect], you cannot change the setting of each item. The auto setup function will also be disabled.
Press the [OK] button to confirm, and then press the [MENU] button.
z You cannot enable the [Direct Power on] function if you select [Off].
zThe [POWER] indicator flashes red and green during the power manage- ment mode.
FROM MENUS
107
