Canon manual Connecting to an External Monitor, Connecting to Audio in Termi- nals SX7/X700

Connecting to an External Monitor

You can display an image from the projec- tor to an external monitor.

	VGA cable
	Projector
PROJECTING	To monitor output terminal
	(mini D-sub 15-pin terminal)
AN IMAGE FROM THE COMPUTER
	Commercial VGA cable

Connecting to AUDIO IN Termi- nals (SX7/X700)

Connect an audio cable to the AUDIO IN ter- minal corresponding to the input image sig- nal if you want to use the projector's speaker.

Audio cable

AUDIO OUT terminal

Computer

Commercial Audio cable

You can input an audio signal corresponding to 3 image input systems.

Connect to the AUDIO IN ter- minal corresponding to the type of the input image signal.

for DEGITAL IN/ANALOG IN-1

for ANALOG IN-2

External monitor

Image input terminal

(mini D-sub 15-pin terminal)

AUDIO IN terminal

Projector

SX7/X700

zYou can connect one external monitor. The multi-monitor display is not sup- ported.

zThe projected image is displayed on the external monitor.

zYou cannot output the input signal to the external monitor if it is DIGITAL PC.

zThe speaker outputs the audio signal corresponding to the selected image signal.

zUse an audio cable without a built-in resistor. Using an audio cable with a built-in resistor turns down the sound.

zConnect the audio cable between the AUDIO OUT terminal and an external audio-visual equipment if you want to output the audio signal to the audio- visual equipment (P66).

zThe built-in speaker is monaural.

36