Adjusting the Projection Angle
You can adjust the projection angle with the adjustable foot.
1 Lift the front side of the projector and push the
adjusting foot lock button. The adjustable foot extends.
2 Adjust the projection angle while pushing the adjustable foot lock button, and then release the lock button.
The adjustable feet is fixed.
z With the adjustable foot, the projection angle can be adjusted up to 10 degrees.
z If the projector is tilting in the lateral direction, use the rear adjustable feet on both sides to adjust its angle. You can adjust up to 10mm with one foot.
If Keystone Distortion is Too Large
Extending the adjustable foot too far causes keystone distortion. If the distortion is too large, adjust the height of the projector with a pedestal.
The keystone distortion can be corrected with the Auto keystone function or by pressing the [KEYSTONE] button. (P44, 50, 68)
Keystone Distortion
Pedestal
PROJECTING AN IMAGE FROM THE COMPUTER
41
