Canon X700, SX7 manual Press the OK button

3 Press the [OK] button.

zThe result of keystone adjustment is memorized. If you place the projector at the same posi- tion, the keystone adjustment is not necessary.

zWhen the Keystone adjustment is selected, signals are processed digitally. The image may look different from the original one.

zThe aspect ratio of the image may change after the keystone adjustment.

zKeystone can be adjusted vertically and horizontally within the range of +/-20 degrees. The amount of adjustment may be less than +/-20 degrees depending on the combination of the amount of optical zooming, input signal type, and adjustment direction (vertical or horizon- tal).

zIf the keystone distortion is too large to adjust, move the projector installation position.

zTo reset the keystone adjustment to 0, press the [KEYSTONE] button again to display the [Keystone reset] window. On the window, select [OK] with the [<] button, and then press the [OK] button.

zIf you select [16:9 D. image shift] for [Screen aspect], the keystone adjustment will be dis- abled. Project the image at right angle to the screen.

PROJECTING AN IMAGE FROM THE COMPUTER

51