
Projecting a Video Image from an AV Equipment
You can project a video image with the steps similar to those for projecting an image from a computer.
This section provides information specific to the projection from an AV equipment. For more detailed information for each step, refer to the corresponding page.
1 Turn on the projector. P38*
zConnect the power cord and turn on the projector. P38
zAdjust the height of the projecting image. P41
zSelect a display language for the first time. P39
zAdjust the focus by performing the auto setup or the focus adjustment if you can- not read the message due to out of focus. P44, 49
2 Prepare the AV equipment.
zTurn on the AV equipment and start playing the video image.
For digital content video image:
3 Press the button to switch the input signal.
P68
zSelect [DIGITAL VIDEO] as the input signal.
4 Press the button.
P68
zAdjust the input signal, focusing, keystone distortion, and so on automatically using the auto setup function.
PROJECTING AN IMAGE FROM AV EQUIPMENT
5 Press the button.
zSelect an appropriate image mode depending on the projecting image. P53*
zSelect an appropriate screen mode from the [Aspect] menu. P71, 88, 89
Stopping projection...
Turn off the projector. P58*
zTurn off the projector and remove the power cord from the AC outlet.
*Those steps are same as those for projecting the computer screen.
67