PROJECTING AN IMAGE FROM AV EQUIPMENT

Selecting Aspect Ratio of the Projecting Image (Screen aspect)

You can select among three aspect ratios of the projecting image according to the aspect ratio of the projected screen.

You can project an image on the whole screen by setting [Screen aspect].

zYou can set [Screen aspect] from menu. Refer to the section [Screen aspect] on the menu for details (P99).

„4:3

Select this when you use a screen with aspect ratio of 4:3.

The following table shows the available [Aspect] mode for each input signal.

Input signal

Available [Aspect] mode

 

 

VIDEO

Full screen

S-VIDEO

Wide

SCART

 

 

 

COMPONENT

Full screen

Auto

DIGITAL VIDEO

Wide

 

 

 

„16:9

Select this when you use a screen with aspect ratio of 16:9.

Select [4:3] from the [Aspect] menu if you want to project a video image with aspect ratio of 4:3 in this mode (P71).

The following table shows the available [Aspect] mode for each input signal.

Input signal

Available [Aspect] mode

 

 

VIDEO

4:3

S-VIDEO

Wide

SCART

 

 

 

COMPONENT

 

(480i/575i/480p/575p)

4:3

DIGITAL VIDEO

Wide

(480p/575p)

 

 

 

COMPONENT

 

DIGITAL VIDEO

Wide

(720p/1035i/1080i)

 

 

 

z [Auto screen color] may not correct the screen color properly. If such is the case, correct it manually. (P96)

72

Page 72
Image 72
Canon SX7, X700 manual Video