Canon SX7, X700 manual Setting up the Digital Video Input Signal, Setting a Password, Digital video

SETTING UP FUNCTIONS FROM MENUS

Setting up the Digital Video Input Signal

[Digital video]

DIGITAL VIDEO

You can select the standard of the digital video input signal.

T

System settings

T

Other settings

T

Digital video

FProjects a full range digital signal.

LProjects a limited range digital sig- nal.

Press the [OK] button to confirm, and then press the [MENU] button.

z Refer to the User's Manual that came with the AV equipment for more detailed information on settings.

Setting a Password

[Password settings]

DIGITAL PC ANALOG PC

DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO

You can set a password to the projector.

Once you set the password, you will need to enter the password each time you turn on the projector.

T

System settings

T

Other settings

T

Password settings

Off	Disables the password protection.
	Enable the password protection.
On

Press the [OK] button to confirm, and then press the [MENU] button.

z Once you set a password, the pass- word entry screen appears at power- on. Enter a 4-digit password with [<], [<], [<], and [>]. If the password is valid, projection starts. If you enter a wrong password three times, the pro- jector will be turned off.

zTo cancel the password, remove the power plug from the AC outlet after the projection, and then insert the power plug while holding down the [MENU] button until the projector beeps.

112