I N I T I A L S E T U P 12

AUTO TUNER SETUP

During Auto Tuner Setup, the TV will automatically scan through all available channels and memorize the active ones so that when you scan, you do not pick up weak or noisy channels.

Press any MENU button

To AUTO TUNER SETUP

To operate

TUNER MODE : CABLE AIR

START

To choose CABLE or AIR

To move to START

To start Auto Tuner Setup

NOW

PROGRAMMING!

48

The Programming takes approximately

1 to 2 minutes

CHANNEL SUMMARY

You can add or delete channels from channel scanning. You can also lock out any “unauthorized” viewers from one or up to all 181 channels.

Press any MENU Button

To CHANNEL SUMMARY

To operate

Note: Noise Muting will not work while you are in the Channel Summary menu.

SCAN

You can manually set channels to scan that were too weak to be picked up during Auto Tuner Setup. Conversely, if a channel was too weak to receive a good picture but was picked up anyway, delete it by removing the . (If you have not performed the Auto Tuner Setup described in the previous column, please do so now.)

NOTES:

During Initial Setup, the TV will be programmed to only receive active channels. Once the channels are activated by the Auto Tuner Setup they will be includ- ed in Scan.

Some weak channels may be included or omitted during this procedure. You can add or delete any channels from scanning in the Channel Summary.

PROGRAMMING OVER!

Note: Noise Muting will not work while Auto Tuner Setup is working.

CH NO.

SCAN

01

02

03

04

05

CH NO. SCAN

06

07

08

09

10

CHANNEL -/+ to select the channel

To the SCAN column

To add or delete from scan

EXIT when finished

Note: Channels set to scan will be marked with an .

Note: Some cable systems experience interference from radio frequencies on Cable Channel 95. If you like, you can delete this channel from scanning by removing the

Continued next page ...

Page 13
Image 13
JVC TV 20240 manual I T I a L S E T U P, Auto Tuner Setup, Channel Summary