JVC TV 20240 T T O N F U N C T I O N S T V, Button Functions Display, Video Status, Sleep Timer

B U T T O N F U N C T I O N S - T V 24

BUTTON FUNCTIONS

This section will describe in detail the different buttons on your remote control and their functions. Buttons related to the operation of the televi- sion are listed first, followed by the buttons used to operate the VCR. The names of individual buttons in this section are printed in SMALL CAPS.

DISPLAY

The Display screen shows the current status of timers and inputs.

DISPLAY
07
NOW	12:20 PM
	JAN/26/99
SPEED	EP
REMAIN	--:--
SLEEP TIMER	OFF
ON/OFF TIMER	OFF

❑The channel or AV input (Channel 07)

❑Current time (12:20 PM)

❑Current date (Jan. 26, 1999)

❑Recording Speed (EP)

❑Amount of tape remaining on video cassette. (--:--)

❑Sleep Timer status/minutes remaining (OFF)

❑On/Off Timer status (OFF)

Each press of the DISPLAY button changes the display mode:

DISPLAY TIME CHANNEL VCR OFF

Display shows the above menu screen. Time shows only the current time over the television picture. Channel shows only the number of the channel the television is currently tuned to. VCR shows the VCR's current function (for example - "Play") and tape counter.

Note: VCR display is only available when there is a tape in the unit.

VIDEO STATUS

The VIDEO STATUS button gives your television a movie theater-like quality with the “Cinema” setting, raises the level of video game detail with “Game” setting, or resets display to factory settings with “Standard”.

“Standard” resets the picture settings to factory-set levels.

“Cinema” Gives a film-like look to televi- sion and video programs

“Game” enhances the appearance of video game graphics.

VIDEO STATUS

CINEMA GAME STANDARD

SLEEP TIMER

Sleep Timer turns off the TV for you in case you fall asleep. Program it to work in intervals of 15 minutes up to 180 minutes.

SLEEP TIMER

0 15 30 45 60 75 90 105 120 135 150 165 180

SLEEP TIMER MESSAGE

20 seconds prior to the automatic shut-off, this message will appear:

GOOD NIGHT ! !

PUSH SLEEP TIMER BUTTON

TO EXTEND.

You then have 20 seconds to press the SLEEP TIMER button to delay turn off for another 15 minutes.

NOTES:

Please note that if the clock, Sleep Timer, or On/Off Timer are not set, the initial Display screen will state “Clock Not Set,” “Sleep Timer Off,” and “On/Off Timer Off,” respectively.

Notes on Display:

"Remain" automatically calculates how much time is remaining on a video cassette inserted in the unit. If the display reads "--:--", run the tape a little bit, then try Display again.

If there is no tape inside the unit, Remain will read "--:--"