9 GETTING STA R T E DCHANGING CHANNELS
10 key direct access.
Press the numbers on the remote’s 10 key pad. For single-digit channel numbers press 0 then the
number. For channels above 100, press the 100+ button plus the 2-digit number.
CHANNEL –/+ button.
Press the CHANNEL –/+ button, to scan the channels in order.
❒After you operate the Auto Tuner Setup (page 12), all of the blank, or empty, channels will be re m o v e d
f rom scanning so that there is no noise or channel snow when you scan, only active channels.
Return.
Press the RETURN button to return to the previous channel. First, select a channel
(game #1). Then, select another channel (game #2) with the 10 key pad and push the RETURN button
to flip directly back and forth.
1
2
3
❒Press the POWER button on the remote control or the TV/VCR combo front panel. The On Timer
lamp will glow red.
❒Make sure that the TV/CATV switch on the remote is set to TV. Switch to CATV only if you plan to
operate a cable box. If you switch to CATV you will not be able to operate the TV/VCR combo
functions with the remote, only the cable box functions!
❒To turn the power off, press the POWERbutton again. The On Timer lamp will go out.
❒The On Timer lamp will glow green when the On/Off Timer is set to yes, even when the TV power
is off.
POWER
Adjust the volume with the VOLUME –/+ buttons on the TV/VCR combo front panel or on the
remote control. Press the VOLUME –button to lower the volume. Press the VOLUME + button to
raise the volume.
Press the MUTING button to instantly turn the volume off to zero. To restore the volume to the
previous volume level, simply press the MUTING button again.
ADJUSTING VOLUME
VOLUME 13
|||||||
-------------------
1
2