Canon SX7, X700 manual Quick Reference How to start projection, Computer

Quick Reference – How to start projection

Computer

1.

2.

3.

Install the projector. P30-31

zInstall the projector at the desired distance from the screen.

Connect the projector. P34-37

zConnect the projector and the computer with a cable.

Turn on the projector. P38-39

zConnect the power cord and turn on the projector.

zAdjust the height of the projecting image (P41).

zSelect a display language when turning on the projector for the first time (P39).

4.

5.

6.

7.

Press the	button.	P44
z Adjust the focus of the screen.
Set up the computer.		P42-43

zTurn on the computer and set the resolution.

Select the input signal by pressing the button.P46-48

z Select an appropriate input signal in accord with the signal from the computer.

Press the button again.P44

z Adjust the input signal, focusing, keystone distortion, etc. automatically with the auto setup function.

8. Press the button. P52

zOptimize the input signal with the auto PC function (Skip this step if the projector is projecting an image properly.)

9. Select the image mode with the button.P53-54

z Select an appropriate image mode for projection.

z Specify the aspect ratio or display area in the [Aspect] menu as required (P55,

88).
10. Start the presentation.	P76-81

zSet the useful functions available during the presentation from the remote control.

Finishing the projection...
Turn off the projector	P58-59

zTurn off the projector and unplug the power cord.

2